【摘 要】
：
The TiN/Ni composite coatings were deposited on 7005 aluminium alloy by high speed jet electroplating and then processed with plasma transferred arc(PTA) scanni
【机 构】
：
School of Materials Engineering
论文部分内容阅读
The TiN/Ni composite coatings were deposited on 7005 aluminium alloy by high speed jet electroplating and then processed with plasma transferred arc(PTA) scanning process. The microstructure, microhardness and friction coefficient of PTA scanning treated specimens were investigated. It is shown that the PTA scanning treated specimens have a rapidly solidified microstructure consisting of the uniformly distributed TiN phase and fine Al3Ni2 intermetallic phases. The composite coating has an average microhardness of approximately HV 800. The friction coefficient of PTA scanning treated specimens (oscillated at around 0.25) is considerably lower than that of TiN/Ni composite coating (oscillated at around 0.35). The corrosion behavior of the composite coating in 3.5% NaCl solution at room temperature was also determined using a potentiostat system. In comparison with the corrosion potential φcorr of -0.753 V for 7005 aluminium alloy, the corrosion potentials for TiN/Ti composite coating and PTA scanning treated specimen are increased by 0.148 V and 0.305 V, respectively. The PTA scanning treated specimen has the lowest corrosion current density Jcorr as well as the highest corrosion potential φcorr, showing an improved corrosion resistance compared with 7005 aluminium alloy.
其他文献
随着我国经济的发展,国家对农业发展和投入也越来越大,相关的农业水利技术也飞速发展。然而,我国广泛分布的大量小型农田的水利灌溉渠道大都显得过于老旧,因此,在以农业发展
水利工程是关系国计民生的基础性建设，对我国的经济发展产生着十分重要的影响。因此，国家对水利工程建设给予了高度重视，在水利工程中的投入也不断增多，但是大多数水利工程仍旧存
本文根据杂交谷子系列品种的生产特性，从整地播种、施肥管理、收获等几方面总结了杂交谷子的全程机械化栽培技术，希望为杂交谷子机械化栽培提供技术指导。
目的分析2011年景德镇地区重症手足口病患儿标本肠道病毒71型(EV71)分离株2011JDZ35全基因组序列特征。方法采集重症手足口病患儿咽拭子标本,进行病毒分离和逆转录-聚合酶链
目的确定并利用荧光共振能转移法(FRET)对以HIV-1 gp41 N端七联重复序列(NHR)为靶点的融合抑制剂进行筛选和作用机制研究。方法 FRET采用金属络合物多肽技术设计针对不同结合位点、结合强度可调、涵盖全部NHR序列的靶点和探针,对HIV融合抑制剂进行高通量筛选。由于HIV在进行膜融合时其gp41的N端NHR和C端CHR可形成稳定的六螺旋结构,因此,利用圆二色谱仪对FRET所使用的靶点/
A series of photocatalysts, K11[Ln(PW_(11)O_(39))_2]/PVA (Ln=La, Ce, Pr, Nd, Sm) were prepared by K11[Ln(PW_(11)O_(39))_2] (Ln=La, Ce, Pr,Nd, Sm) containing fiv
Orthogonal experiments are used to design the pulsed bias related parameters, including bias magnitude, duty cycle and pulse frequency, during arc ion depositio
The ratio and sensitivity of giant magnetoimpedance(GMI)in grain oriented silicon steels(Fe-4.5%Si)are improved after furnace annealing in air for 20 min.By ann
The phase and morphology transformation during the hydrothermal treating process of Y_2O_3 was evaluated with X-ray diffcrcnce (XRD), scanning electron microsco
Ti-43Al-9V-Y alloy sheets with dimensions of 300 mm×100 mm×(1.5-2) mm were produced by hot-pack rolling. After rolling, the microstructure of Ti-43Al-9V-Y all