【摘 要】
:
Fatigue crack propagation (FCP) behaviors were studied to understand the role of SiC particles in 10 wt pct SiCp/A2024 composites and Si particles in casting al
【机 构】
:
Department of Aeronautical Engineering,The State Key Laboratory of Rolling and Automation
论文部分内容阅读
Fatigue crack propagation (FCP) behaviors were studied to understand the role of SiC particles in 10 wt pct SiCp/A2024 composites and Si particles in casting aluminum alloy A356. The results show that a few particles appeared on the fracture surfaces in SiCp/Al composites even at high AK region, which indicates that cracks propagated predominantly within the matrix avoiding SiC particles due to the high strength of the particles and the strong particle/matrix interface. In casting aluminum alloy, Si particle debonding was more prominent.Compared with SiCp/Al composite, the casting aluminum alloy exhibited lower FCP rates, but had a slight steeper slope in the Paris region. Crack deflection and branching were found to be more remarkable in the casting aluminum alloy than that in the SiCp/Al composites, which may be contributed to higher FCP resistance in casting aluminum alloy.
其他文献
The adsorption isotherms of mixtures of linear alkanes, involving n-pentane, n-hexane, and n-heptane in pillared layered materials (PLMs) with three different p
Layered ternary ceramics represent a new class of solids that combine the merits of both metals and ceramics.These unique properties are strongly related to the
The spangles on hot dip galvanized steel sheet were investigated on an X-ray diffraction(XRD) meter by the rotating crystal method. The correlations between the
The titled high performance foamed concrete was developed from Portland cement, ultra fine granulated blast-furnace slag, pulverized fly ash and condensed silic
Inorganic tubular nanostructure MS2 (M=Mo, W, Nb, Ta) were synthesized by two alternative routes. Thermal decomposition method was used for producing fullerence
Solubility of dimethyl-2,6-naphthalene dicarboxylate in acetic acid,N,N-dimethyl acetamide,dimethyl sulphoxide,and N-methyl-2-ketopyrrolidine were determined us
To improve the performance of LiFePO4, single phase Li1-4xTixFePO4/C (x=0, 0.005, 0.010, 0.015) cathodes were synthesized by solid-state method. A certain conte
A new patch antenna system with a metamaterial cover is presented in this paper. The impedance, radiation pattern, and directivity of such an antenna are studie
Microalloying element Nb in low carbon steels produced by compact strip production (CSP) process plays an important role in inhibiting recrystallization, decrea
For the optimal design of a heat exchanger network,the inlet and outlet stream temperatures of each heat exchanger in the network should be known.An explicit an