【摘 要】
：
The stiffness matrix of semi-rigidly connected composite beams considering interface slip was established and the calculation method for elastic seismic respons
【机 构】
：
School of Civil and Architectural Engineering
论文部分内容阅读
The stiffness matrix of semi-rigidly connected composite beams considering interface slip was established and the calculation method for elastic seismic response of composite frame was derived. The corresponding calculation programs were developed. Introducing the dimensionless quantities that were related to the connector shearing stiffness and the joint rotation stiffness, the influences of interface slip and semi-rigid joint on composite frame were transferred to quantitative parameter analysis, taking account of cross sectional properties, materials and linear stiffness of composite beam synthetically. Based on the calculation programs, free vibration frequencies and seismic responses of semi-rigid joint steel-concrete composite frame considering interface slip were calculated. The influences of interface slip and semi rigid joint on dynamic characteristics and seismic response were analyzed and the seismic design advices were presented. The results show that the interface slip decreases the free vibration frequencies and increase the seismic responses of composite frame. The semi-rigid joint reduces the free vibration frequencies and increases seismic responses of composite frame compared with rigid joint. With the increase of joint rotational stiffness, the elastic seismic responses of composite frame increase firstly and then decrease. The effects are related to the ratio of joint rotation stiffness to linear stiffness of composite beam.
其他文献
CO2 gasification of Fuijian high-metamorphous anthracite with black liquor (BL) and/or mixture of BL and calcium stuff (BL+Ca) as catalyst was studied by using
The catalytic effect of activated carbon on the bioleaching of low-grade primary copper sulfide ores using mixture of Acidithiobacillus ferrooxidans and Acidith
The optical quality of Er3+, Yb3+: BaWO4 crystal was grown by Czochralski method. Absorption spectra were measured and energy levels were assigned. According to
Three different Ti-Si oxide structuares, silica supported titania, silica coated titania and intimately mixed silicatitania, containing 10%-40% SiO2, were made
A preliminary investigation of shape memory (SM) effects of SMPU (shape memory polyurethane) knitting fabric is presented in this paper. Three SMPU knitted fabr
Fe_2O_3,TiO_2,CuO and ZnO powders were mixed according to the formula of(1-x)TiO_2 xCuO-Fe_2O_3 or (1-x)TiO_2 xZnO-Fe_2O_3(x=0,0.2 0.4,0.6,0.8,1),and well ball-
To make heat conduction equation embody the essence of physical phenomenon under study, dimensionless factors were introduced and the transient heat conduction
In the forward channel of a networked control system (NCS), by defining the network states as a hidden Markov chain and quantizing the network-induced delays to
A two-dimensional computational model coupling an annular electromagnetic stirring(A-EMS)with a macroscopic heat and fluid flow analysis in Al-alloys semisolid
The electrochemical process of galena in a pH 12.8 buffer solution was investigated using chronoamperometry and chronopoten-tiometry. To establish kinetic param