【摘 要】
：
The morphological evolution of Fe-rich phases in the AlSi9Cu3Mg0. 19(Fe) alloy has been investigated with various contents of Fe, Mn, and Cr. The results show that coarse Chinese script Fe-rich phases appear in the alloy with 0. 6 wt％ Fe combined with tra
【机 构】
：
Key Laboratory of Lightweight and High Strength Structural Materials of Jiangxi Province, Nanchang U
论文部分内容阅读
The morphological evolution of Fe-rich phases in the AlSi9Cu3Mg0. 19(Fe) alloy has been investigated with various contents of Fe, Mn, and Cr. The results show that coarse Chinese script Fe-rich phases appear in the alloy with 0. 6 wt％ Fe combined with trace Mn, while the blocky Fe-rich phases appear combined with trace Cr. Under the coexistence of trace Mn and Cr, a large number of fine Chinese script Fe-rich phases could be visible in the low iron-bearing AlSi9Cu3-Mg0. 19(Fe) alloy (0. 60 wt％). At high Fe level (1. 30 wt％), numerous Fe-rich phases with hexagonal morphologies are observed with the trace Cr, while fish-bone and pentagonal morphologies of Fe-rich phases could be simultaneously observed with the addition of both Mn and Cr. The results reveal that the trace Mn and Cr promote the morphological evolution of Fe-rich phases. The morphology evolution mechanism of Fe-rich phases has been discussed by using the atom radius and electronegativity differences of Fe, Mn, and Cr.
其他文献
Atom probe tomography was utilized to investigate Cu precipitation in a high-strength low-alloy steel isothermally aged at 500 ℃ for 1,4,16,and 64 h after water-quenching from 900 ℃.With prolonged aging time,the Curich precipitates (CRPs) increased in siz
In this work, the serpentine powders were sintered to make the serpentine-reinforced Al-matrix composites, and the microstructures of which were characterized by differential scanning calorimetry, thermal gravimetric analyzer, and X-ray diffractometer. Sc
The Stern-Geary constant (B value) is indispensable to measure the corrosion rate in the microbiologically influenced corrosion (MIC) systems.Linear polarization resistance (LPR) and weight loss methods were used to study the variation of B values for X80
The effect of γ-phase on two-way shape memory effect (TWSME) of polycrystalline Ni56Mn25-xCoxGals.9Gd0.1 alloys was investigated.The results show that an appropriate amount of ductile γ-phase significantly enhances the TWSME.The largest TWSME of 1.4％ with
The effects of substituting Co for Fe on the microstructure and stress rupture properties of K4750 alloy were studied.The microstructure of the alloy without Co (K4750 alloy) and the alloy containing Co (K4750-Co alloy) were analyzed.Substitution of Co fo
The fatigue cracking and fracture behavior of cold-drawn copper subjected to cyclic torsional loading were investigated in this study.It was found that with increasing stress amplitude,the fracture mode of cold-drawn copper gradually changes from a shear
FeGa thin film has been deposited on (100)-oriented GaAs and (001)-oriented Si substrates with different film thicknesses and laser energy densities at room temperature by pulsed laser deposition system. Materials structure and static magnetic of FeGa fil
Microalloying is an effective approach to improve the mechanical properties of γ-TiA1 intermetallic compound.Knowledge about the site occupancy of the ternary alloying element in the crystal lattice of γ-TiAl is highly demanded in order to understand the
Classical powder metallurgy followed by either hot isostatic pressing (HIPing) or repressing-annealing process was used to produce Cu-graphene nanoplatelets (GNPs) nanocomposites in this work.A wet mixing method was used to disperse the graphene within th
In this work, the shear model of metal melt flowing on vibration surface is established, and coupling effects of vibration and shear on the distribution of shear stress in melt and melt solidification microstructure are analyzed. Calculation results show