某酒店餐厅,设计中包括直径800 mm和600 mm的圆柱。现场讨论支模方案时,考虑借用其他项目圆钢模。但实地查看后,没有直径800 mm和600 mm的钢模,如果再到厂家加工钢模,工期太紧且时间不足,而钢模需要用塔式起重机吊装,餐厅施工现场却不在塔式起重机的服务半径内,因此放弃了钢模方案。用木桶原理支木模板,拼接的圆柱形 A hotel restaurant, designed to include cylinders of 800 mm and 600 mm in diameter. On-site discussion of support programs, consider borrowing other projects round mold. However, after the field inspection, there were no steel dies with diameters of 800 mm and 600 mm. If the steel dies were to be machined again by the manufacturer, the construction period was too tight and time was not enough, and the steel dies were hoisted by tower cranes, but the construction site of the restaurant was not on the tower crane Within the radius of service, so give up the steel mold program. Principle wooden bucket with wooden template, spliced ​​cylindrical