论文部分内容阅读
[目的]通过正交试验筛选出水解南珠片的颗粒最佳成型工艺。[方法]以淀粉量、CMC-Na量和乙醇浓度为考察因素,以颗粒收率为考察指标,采用正交设计方法筛选最佳工艺。[结果]水解后的珍珠粉中加入0.8倍量的淀粉,并加入1%CMC-Na,以50%乙醇作为湿润剂混合制粒。[结论]按最佳工艺制备的成型颗粒的收率较高,且成型质量评价均达要求,可为其生产提供科学的实验依据。
[Objective] The orthogonal experiment was used to select the best forming process of the granules of Hydrolyzers. [Method] With starch amount, CMC-Na amount and ethanol concentration as the investigation factors, taking the particle yield as the investigation index, the orthogonal design method was used to screen the best technology. [Result] The hydrolyzed pearl powder was added with 0.8 times the amount of starch, 1% CMC-Na was added and mixed with 50% ethanol as wetting agent to granulate. [Conclusion] The yield of the shaped granules prepared by the best process was high, and the quality evaluation of the molding reached the requirements, which could provide a scientific experimental basis for its production.