用离子腐蚀工艺可使塑料件粘接接头强度显著提高,因离子处理产生密集的“茅草”状结构(即微小尖顶),这种结构能在塑料表面上得到较大的粘接剂浸湿面积和粘接面积。“茅草”状尖顶的长度范围为几十到几百微米,取决于离子束的能量、离子电流的密度及处理时间。到目前为止,这种工艺还只限于处理用于制造医学器具上的小线 Ionic corrosion process can make the plastic parts significantly increase the strength of the joints, due to the ion treatment to produce dense “thatch” -like structure (that is, a small spire), this structure can be in the plastic surface to get a larger adhesive wet area And bonding area. The length of the thatch-shaped spiers ranges from tens to hundreds of microns, depending on the energy of the ion beam, the density of the ion current, and the processing time. To date, this process has been limited to the small lines used to make medical devices