【摘 要】
：
In remote sensing community, IHS (intensity, hue, and saturation) transform is one of the most commonly used fusion algorithm. A study on IHS fusion indicates that the color distortion cannot be avoided. Meanwhile, wavelet decomposition has a property of
【机 构】
：
SchoolofElectronicsandInformationTechnology,ShanghaiJiaotongUniversity,Shanghai200030DepartmentofEle
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
In remote sensing community, IHS (intensity, hue, and saturation) transform is one of the most commonly used fusion algorithm. A study on IHS fusion indicates that the color distortion cannot be avoided. Meanwhile, wavelet decomposition has a property of frequency division in transform domain. And the statistical property of wavelet coefficient reflects those significant features. So, a united optimal fusion method, which using the statistical property of wavelet decomposition and IHS transform on pixel and feature levels, is proposed. That is, the high frequency of intensity component I is fused on feature level with multi-resolution wavelet in IHS space, and the low frequency of intensity component I is fused on pixel level with optimal weight coefficients. Spectral information and spatial resolution are two performance indexes of optimal weight coefficients. Experiment results show that it is a practical and effective method.
其他文献
We use an electrostatic model to study the average kinetic energy of ions ejected from the pure Coulomb explosions of methane clusters (CA4)n (light atom A=H and D). It is found that the ratio of the average kinetic energy of the ions to their initial ave
本文提出了利用液晶光阀和单色激光进行彩色全息图记录的方法.借助于液晶光阀非相干-相干转换的功能,采用新的彩虹全息术,获得了记录于同一块干版上的原彩色目标由红、绿、篮三色所成的三个基色彩虹全息像.用白光透射再现,得到原彩色图的真彩色全息像.这种方法是液晶光阀、条形散斑屏在图像处理中的一种特殊应用.
为了发展惯性约束聚变能驱动装置所需的技术,在日本电子技术实验室建立了高重复率电子束抽运的KrF激光放大器.样机放大器的脉冲电源系统已建成,以1 Hz重复率产生-300 kV、80 ns的脉冲.用脉冲变压器、磁开关和水介质脉冲形成线代替通常的带有球隙开关的Marx发生器,得到高压电短脉冲.这个系统的关键技术之一是强制冷却方法和HIBACHI结构中的阳极箔增加了其寿命.设计采用辐射和传导作为主要冷却过程,并允许箔加温到高温.选择HAVAR和钼分别作承压箔和阳极箔,代替通常的钛箔.箔的最高温度通过数字计算表明本
对于横向泵浦的染料可调谐激光器的性能研究必然涉及腔内诸元件,而腔内诸元件除其物理性能及理论计算外,更为主要的是技术设计和工艺过程.本文则逐一地对它们的设计、工艺和装校技术进行分析.
以斜率检测的面形重构算法为基础，结合导轨指向误差的实验标定结果，分析了导轨指向误差来源对实际检测结果的影响，并对理论分析进行了数值仿真与补偿。结果表明，基于扫描哈特曼原理的波前检测技术对高频误差不敏感；通过拟合低频误差可提高波前检测精度。该研究结果对波前检测技术的工程应用具有重要指导意义。
利用KTP晶体的有效电光系数γc1,制成电光开关,实验研究了它的热光效应,通过温控实现了晶体的静态双折射补偿,并将它成功地运用于调Q脉冲的削波整形。