论文部分内容阅读
一、车刀的研究Ⅰ.介绍先进夹固刀头的车刀1.各种夹固法的优缺点2.机械夹固刀头的车刀3.利用切削力夹固刀头的车刀Ⅱ.车刀种类1.降低成本的车刀2.提高生产率保证质量的车刀甲、减少基本时间的车刀(1)吃刀深度很大的车刀(2)走刀量很大的车刀(3)切削速度很大的车刀(4)重合机动时间的车刀乙、节省辅助时间的车刀丙、节省换刀时间的车刀3.增长刀具寿命的车刀(1)增长刀具耐用度的车刀(2)增加刀刃的车刀(3)增加可磨次数的车刀(4)避免损坏的车刀4.提高质量的车刀(1)导角大于90°的车刀(2)斜刃割刀(3)消振车刀5.综合车刀二、新型车刀的建议Ⅰ.五种新型车刀的建议1.仿苏联刀具研究院所创造的切削刀力夹固刀头的车刀2.两种圆锥形刀桿上用切削力在燕尾槽中夹固刀头的车刀3.两种圆锥形刀桿的高速钢车刀Ⅱ.圆锥形车刀的理论根据及其他1.圆锥形刀桿的原理2.圆锥形刀桿的保险装置3.圆锥形车刀可以用很大的走刀量的原理4.横刃转动后虽然刀刃不平行工件中心,但工件的表面光洁度还不差的原理5.圆锥形车刀的试验结果6.制造硬质合金刀采用的操作过程7.圆锥形车刀的新工作法8.新型车刀尚待研究的问题三、结论
First, the lathe research I. Introduction advanced clamping tool bit 1. Advantages and Disadvantages of a variety of clamping method 2. Machine clamping tool bit 3. Using the cutting force clamping tool bit II Types of Turning Tools 1. Turning Tools for Reducing Cost 2. Turning Tools for Increasing Quality and Reducing Basic Time (1) Turning Tool with Large Depth (2) Turning Tool with Large Cutting Amount (3) Turning tools with high cutting speed (4) Turning tools that coincide with motoring time B, Turning tools that save auxiliary time C, Turning tools that save tool change time (3) Turning tools that increase tool life (2) Turning tool with increased edge (3) Turning tool with increased number of sharpening (4) Turning tool to avoid damage (4) Turning tool with improved quality (1) Turning tool with guide angle greater than 90 ° ) Inclined cutting blade (3) Vibration cutter 5. Integrated turning tool Second, the proposal of a new turning tool Ⅰ. Suggestions of five new turning tools 1. Cutting force clamping tool head created by the Soviet Union Tool Research Institute Of the tool 2. Two kinds of conical cutter bar with cutting force in the dovetail slot in the tool bit holder 3. Two kinds of conical cutter bar high-speed steel turning tool II. The theoretical basis of the conical turning tool and other 1. The principle of conical arbor 2. Circle Conical arbor safety device 3. Conical turning tool can be used a large amount of principle 4. After turning the horizontal edge of the blade edge is not parallel to the workpiece center, but the workpiece surface finish is not bad principle 5. Conical Turning tool test results 6. Carbide knife manufacturing process used in the operation 7. Conical tool new work method 8. New turning tool remains to be studied Third, the conclusion