以前的压力机坯件自动排出装置,需要根据工件的大小和重量,保持一定的滑槽高度、倾斜度。本装置(见附图),能够随着滑槽的高度和倾斜度一起调节;由于采用了与压力机导板的运动同时往复的机构,故可强坯件自动排出。本装置不需要按工件的高度制造,且动力源可从压力机导板的运动中获得。 Prior to the press blanks automatic discharge device, according to the size and weight of the workpiece, to maintain a certain chute height, inclination. The device (see attached drawings) can be adjusted with the height and inclination of the chute; due to the reciprocating mechanism which is used at the same time as the movement of the press guide plate, the strong blank can be automatically discharged. The device does not need to be made to the height of the workpiece, and the power source can be obtained from the movement of the press plate.