论文部分内容阅读
一、划行器安装方法1.将进油管接入换向机构油缸上,将左右钢丝绳分别固定于右滑套和弹簧杆上.2.左右钢丝绳分别从梁左右端引出.3.将换向机构另用M16螺栓固定于主梁前进方向左端内壁里.4.将左右钢丝绳分别固定于左右划行器上,其长短的确定可使划行器于工作位置下15厘米,此时换向机构的滑套也置于相反位置,这样钢丝绳应处于拉紧状态.划行器的安装是将划行总成通过固定架焊合用U形卡丝和螺母固定于主梁的两端.
First, the installation of track planner 1. Access to the fuel tank on the reversing mechanism will be fixed around the right rope and spring rod on the right rod .2 around the wire rope from the left and right ends of the lead .3 will be commutated The other M16 bolts fixed in the direction of the left side of the main beam in the inner wall .4 will be around the wire rope were fixed on the left and right track planter, the length of the determination of the tracker in the working position can be 15 cm, then the commutation mechanism Of the sleeve is also placed in the opposite position, so that the rope should be tightened state.Rarger installation is the row assembly through the fixed frame welding with U-shaped wire and nut fixed to both ends of the girder.