论文部分内容阅读
在产品总装时,很多零件需要进行除蜡处理,为此我们改装了一台T110型链条通过式清洗机,把原来清洗机闭式循环水改为开式循环水。再在地面上挖一个水池(见图示)。水是采用蒸汽加热,当水池的水沸腾后,利用水泵把水压到清洗机里,经清洗机的喷嘴喷射到零件表面上,把蜡熔化并冲洗掉。蜡随水一起流回水池内时,由于流速慢,蜡和水比重不同,熔化的蜡慢慢地浮在回水池上部,
In the final assembly of the product, many parts need waxing treatment, for which we have adapted a T110-type chain through the washing machine, the original closed loop washing machine to open circulating water recycling. Then dig a sink on the ground (see illustration). Water is heated by steam. When the water in the pool is boiled, the water is pumped into the washing machine by the water pump, sprayed onto the surface of the part by the nozzle of the washing machine, melted and washed away. When the wax flows back to the tank together with the water, the molten wax slowly floats in the upper part of the return tank due to the slow flow rate and the different proportion of wax and water,