【摘 要】
：
We discover single and homocentric optical spheres of the three-dimensional inhomogeneous nonlinear Schr?dinger equation (NLSE) with spherical symmetry, which is a novel model of light bullets that can present a three-dimensional rogue wave. The isosurfac
【机 构】
：
InstituteforAdvancedStudy,ShenzhenUniversity,Shenzhen518060,ChinaIntelligentInternetofThingsandIntel
【出 处】
：
PhotonicsResearch
论文部分内容阅读
We discover single and homocentric optical spheres of the three-dimensional inhomogeneous nonlinear Schr?dinger equation (NLSE) with spherical symmetry, which is a novel model of light bullets that can present a three-dimensional rogue wave. The isosurface of this light bullet oscillates along the radius direction and does not travel with the evolution of time. The localized nature of rogue wave light bullets both in space and in time, which is in complete contrast to the traveling character of the usual light bullets, is due to the localization of the rogue wave in the one-dimensional NLSE. We present also an investigation of the stability of the optical sphere solutions. The lower modes of perturbation are found to display transverse instabilities that break the spherical symmetry of the system. For the higher modes, the optical sphere solutions can be classified as stable solutions.
其他文献
We investigate the multilevel modulation for red-green-blue light emitting diode (RGB LED). A simple approach for extracting soft values from the modulation is proposed. The mapping way from bits to the modulated symbols for the multilevel modulation is a
去年，掺硫酸铜的明胶在高功率激光照射下射出准直的X射线的时候，引起了一场至今在激光界仍热烈进行的争论。犹他大学凯普罗斯（John Kepros)软片上出现的微小的斑点，不用说不是X射线激光，连是否是X射线都还没有弄清楚，虽然如此，猜测还是在继续增多。输出是受激发射吗？它能满足X射线激光存在的判据吗？要末那些X射线是否来自自发发射？
减阻对于船舶运输有重要意义。采用超快激光在6061铝合金表面制备多种形状的微纳沟槽结构,研究了飞秒激光制备微纳结构工艺以及微U形沟槽结构表面的减阻性和耐蚀性。研究结果表明:调控超快激光加工参数与扫描路径可以快速制备出各种形状的微沟槽结构,其表面布满烧蚀产生的纳米颗粒,呈超亲水表面;与未经处理的表面相比,周期宽度分别为28 μm和50 μm、深度分别为20 μm和25 μm的两种微U形沟槽结构表面在水槽移动对比实验中的运动时间分别缩短了4.3%和11.6%,表明其水面阻力明显降低;将两种微U形结构表面进行低
建立了适用于红外鱼眼系统的目标运动模型,在不影响精度的前提下减少计算量是达到实时稳定地跟踪红外目标的途径之一。分析了目标在该系统成像的运动特性,结合系统帧频采样率较高的特点,提出了一种改进的匀速运动模型,并从理论上与"当前"统计模型的跟踪精度进行了对比分析。结果表明,在红外鱼眼系统采样率较高的情况下,匀速运动模型可以达到与"当前"统计模型相当的跟踪精度;利用卡尔曼滤波对模拟轨迹进行跟踪实验,验证了
集成电路(IC)芯片引脚的共面性检测是确保其贴装质量的关键。基于单幅图像提出一种IC引脚共面性检测方法。首先,基于单目视觉系统建立相机、光源和被测表面的关系模型;其次,给出发光二极管(LED)环形结构光源的光强标定方法,并通过实验确定被测IC引脚材质的相关参数;然后,基于建立的光强与图像灰度的关系模型给出高度信息的求解方法;最后,基于高度信息还原IC引脚及其焊点的表面三维形貌。实验结果表明,本文方
数年来，医用激光又获得迅速发展，除了眼科的激光凝固以外，二氧化碳激光手术器的发展尤为显著，已用于皮肤科、外科、神经外科、矫形外科、妇科、五官科等。中等功率的连续输出的二氧化碳激光用于治癌，不仅击破了激光脉冲可使癌细胞远处转移的消极看法，而且由于血管的封闭而具有防止癌细胞播散的独到之处。
We demonstrate a strain compensated long lifetime semiconductor saturable absorber mirror (SESAM) with a high modulation depth for fiber lasers. The SESAM was measured to have a damage threshold of 9.5 mJ/cm2, a modulation depth of 11.5%, a sat
搭建了主-从结构的全光被动同步激光器,将主激光器输出脉冲功率放大后注入从激光器,利用注入脉冲在从激光器中的交叉相位调制效应,实现了1029.9 nm泵浦光与1585.5 nm信号光的脉冲同步。采用声光调制器进行选频并配合级联光纤放大,提高了泵浦光脉冲的峰值功率,并通过优化光纤链路长度有效控制了泵浦光光谱展宽。该双色同步脉冲在PPLN晶体中进行非线性差频处理,当重复频率为100 kHz时,获得了3 dB光谱带宽为0.77 nm、中心波长为2940 nm的线偏振皮秒脉冲,最大单脉冲能量为1.8 μJ,泵浦光转