我选厂使用CYT600×1800磁选机三台,该机原采用橡胶带缠绕筒体表面作为保护层。使用一年多后,橡胶带相继脱落,不锈钢筒体受到严重磨损,胶带使用寿命短,有时少数条带出现拱起现象。为解决上述问题,我厂采用了环氧树脂、石英砂直接涂于筒体表面作耐磨保护层,使用效果较好。 I choose the factory CYT600 × 1800 magnetic separator three, the aircraft originally used rubber tape wound cylinder surface as a protective layer. After more than one year of use, the rubber tapes come off one after another, the stainless steel cylinder is severely worn, the tapes have short service life, and sometimes a few bands appear arching phenomenon. To solve the above problems, I plant using epoxy resin, quartz sand directly applied to the cylinder surface for wear protective layer, the use of better.