轴销形嵌件在压铸时,嵌件出现的表面飞边、划伤和尺寸超差的缺陷,在采用压紧嵌件的紧固销和弹簧后,消除了嵌件表面出现的飞边。在把模具安装嵌件的孔做出起模斜度,使嵌件的有效使用部分与模具孔不直接接触时,消除了嵌件表面拉伤的痕迹。为防止嵌件自动掉落下来,在压铸模具里设置磁铁后,可将铁质嵌件牢牢地吸附固定在模具里。 Shaft-shaped inserts In-die casting, the appearance of scratches, scratches and oversized imperfections on the insert eliminates the flashing on the insert surface with the tightening pins and springs that press the insert. In the mold installation of the hole to make the mold from the tilt, the effective use of the part of the insert and the mold hole is not in direct contact, eliminating the traces of the surface of the insert strain. In order to prevent the insert from falling down automatically, after setting the magnet in the die-casting mold, the iron insert can be firmly fixed and fixed in the mold.