论文部分内容阅读
目前广泛应用的M-10和MDT系列乳化液,均是以基础油作为载体,配合乳化剂等添加剂以水为主体(含水量95%),对国产液压支架常用的各种金属和密封材料有一定的防锈性和适应性。但是当用高硬度的原水来进行乳化油配比时候,由于乳化液属于热力学不稳定体系,在使用过程中有一定的油皂析出,会造成滤网堵塞,而这些析出的油皂又很难清洗,所以经常堵塞液压支架阀体,造成整个支架体系的瘫痪,同时给用户造成巨大的经济损失。
Currently widely used M-10 and MDT series of emulsions are based on the carrier oil as a carrier, with emulsifiers and other additives to water as the main (95% moisture content), the domestic hydraulic stent commonly used in a variety of metals and sealing materials A certain anti-rust and adaptability. However, when using high hardness of raw water to emulsify the oil ratio, due to the emulsion is thermodynamically unstable system, in the course of a certain oil soap precipitation, will cause the filter plug, and the precipitation of soap is very difficult Cleaning, it often plug the hydraulic bracket body, resulting in paralysis of the entire stent system, while causing huge economic losses to users.