【摘 要】
:
Polycrystalline Bi4Ti3O12 thin films with various fractions of a-axis, c-axis and random orientations have been grown on Pt(111)/Ti/SiO2/Si substrates by laser-ablation under different kinetic growth conditions. The relationship between the structure and
【机 构】
:
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University
【出 处】
:
武汉理工大学学报(材料科学版)(英文版)
论文部分内容阅读
Polycrystalline Bi4Ti3O12 thin films with various fractions of a-axis, c-axis and random orientations have been grown on Pt(111)/Ti/SiO2/Si substrates by laser-ablation under different kinetic growth conditions. The relationship between the structure and ferroelectric property of the films was investigated, so as to explore the possibility of enhancing ferroelectric polarization by controlling the preferred orientation. The structural characterization indicated that the large growth rate and high oxygen background pressure were both favorable for the growth of non-c-axis oriented grains in the Bi4Ti3O12 thin films. The films with high fractions of a-axis and random orientations, i e, f (a-sxis) = 28.3% and f (random) = 69.6%, could be obtained at the deposition temperature of 973 K, oxygen partial pressure of 15 Pa and laser fluence of 4.6 J/cm2, respectively. It was also noted that the variation of ferroelectric polarization was in accordance with the evolution non-c-axis orientation. A large value of remanent polarization (2Pr = 35.5 μC/cm2) was obtained for the Bi4Ti3O12 thin films with significant non-c-axis orientation, even higher than that of rare-earth-doped Bi4Ti3O12 films.
其他文献
Different failure modes and morphologies were found in the chemical vapor infiltration (CVI) 2D C/SiC torque tubes with different thickness. To characterize the density and porosity of the ceramic matrix composite (CMC) torque tube, a CT test was conducte
A novel low temperature co-fired ceramic (LTCC) material was fabricated by zinc titanate (ZnTiO3) ceramics doped with B2O3-BaO-SiO2-ZnO-Li2O (BBSZL) glass. The influences of BBSZL glass on wetting behavior, sintering activation energy, phase composition,
Amine-functionalized imidazolium-based poly(ionic liquid) brushes on mesoporous silica were synthesized via “grafting through” technique and were applied as model sorbents to understand physisorption and chemisorption of carbon dioxide molecules. The expe
We obtained the reaction mechanism of cerium with oxygen by means of density functional theory (DFT) under the explosive or detonation situation. The energy level order of cerium was calculated and the potential energy profile was plotted. The properties
BaTiO3/epoxy composites consisting of two three-dimensionally interpenetrating networks of BaTiO3 and epoxy phases were prepared using a new approach. The BaTiO3/epoxy composites exhibit a colossal dielectric constant, low dielectric loss and high flexura
A high production efficiency synthesis method was used to produce a stacked vanadium nitride nanoparticle structure with an inexpensive raw material as an anode material and high surface area polystyrene was used the cathode material for lithium ion hybri
Polymer-based composite was investigated by embedding calcium copper titanate (CaCu3Ti4O12;CCTO) fillers into polytetrafluoroethylene(PTFE) matrix.The dielectric performances of the composite were investigated within the frequency range fiom 100 Hz to 1 M
Microstructure evolution and properties of hot-extruded Inconel 625 alloy were investigated at different creep temperatures, aging time and strain rates. The experimental results indicate that the Inconel 625 alloy exhibits an excellent creep resistance a
Cetyltrimethylammonium bromide (CTAB) was incorporated into silicon carbide whiskers (SiCw) to improve their hydrophobicity. The solution casting method was employed to develop composite membranes of polyvinylidene fluoride (CTAB-SiCw/PVDF) with different
The natural rubber/zinc disorbate composite was prepared by the in situ formation of zinc disorbate from zinc oxide and sorbic acid in natural rubber. The structure variations of fillers during mixing and vulcanization processes were studied by X-ray diff