压路机在使用和维修中经常因配件购买和加工不及时延误修复时间、影响工地施工。为了尽快修复压路机,适应工地施工需求,我们在使用和维修中采取了一些应急修复方法,使压路机迅速恢复正常。本文介绍我们在使用和维修中总结出的10种应急修复方法,供同行参考。1.汽缸盖工艺孔端盖漏水某型振动压路机配置的康明斯发动机缸盖上的工艺孔端盖较薄,经腐蚀后漏水。压路机工作中,该端盖发生漏水后,一时难以购买和加工。对此可采取以下应急修复方法:若该端盖泄漏孔很小,可用木螺钉裹上生胶带拧入即可;若该端 Roller in use and maintenance often due to parts purchase and processing delay in time to repair time, affecting site construction. In order to repair the roller as soon as possible and adapt to the site construction requirements, we have adopted some emergency repair methods in the use and maintenance to make the roller back to normal quickly. This article describes the 10 emergency fixes that we have summarized in the use and maintenance for your peer reference. 1. Cylinder head cover hole leakage process Vibration roller configuration of a Cummins Engine cylinder cover on the cover of the hole is thin, leaking after corrosion. Roller work, the end cap leakage occurred, sometimes difficult to buy and processing. This can take the following emergency repair methods: If the cover leak holes can be screwed into the raw wood screws can be wrapped; if the end