论文部分内容阅读
冶金部钢铁研究总院在进行矿石烧结试验装置的研制过程中,进行了大量的调研工作;吸取了国内已有装置的成功经验,设计和研制成一套新的较完整的烧结试验室试验装置,有些设备属国内首创,整套试验装置达到了国内先进水平。于1986年11月8日通过了冶金部组织的技术签定。该装置的主要设备性能如下。 1)烧结杯按抽风炉篦直径为φ295、φ220和φ160三种配备了烧结杯,杯体锥度5%,高度均为500 mm。杯体为耐热铸铁双壁结构,壁间填有绝热材料。三种烧结杯可共用一台倾翻机和一台单辊破碎机,并相应地与1.0、0.5和0.25三种型号的
Metallurgical Research Institute of Iron and Steel in the ore sintering test device development process, conducted a lot of research work; learned from the successful experience of existing installations, design and development into a new set of more complete sintering laboratory test device, Some equipment is a national initiative, the whole set of test equipment has reached the advanced domestic level. On November 8, 1986 passed the Ministry of Metallurgical Organization of the technical signature. The main equipment performance of the device is as follows. 1) The sintering cup is equipped with a sintered cup with a diameter of φ295, φ220 and φ160. The cup has a taper of 5% and a height of 500 mm. Cup body is heat-resistant cast iron double-walled structure, wall filled with insulation material. Three sintering cups can share a tumbler and a single roll crusher, and the corresponding 1.0, 0.5 and 0.25 three models