Electrochemical studies on La-Co alloy film in acetamide-urea-NaBr melt system

来源 :中国有色金属学会会刊(英文版) | 被引量 : 0次 | 上传用户:w232010
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The kinetics of La-Co alloy film in acetamide-urea-NaBr molten salt electrolyte at 353 K was investigated. It is shown that the reduction of Co( Ⅱ ) to Co is irreversible reaction with the transfer coefficient of 0.28 and the diffusion coefficient of 7.46 × 10-5cm2/s. While La( Ⅲ ) cannot be reduced to La directly; but can be codeposited with cobalt. The content of La in the uncrystallized La-Co alloy film increases with increasing cathodic overpotential, molar ratio of La3+ to Co2+ and electrolysis time as well, and reaches the maximum of 66.32%.
其他文献
The vacuum-free vibration liquid phase(VLP) diffusion-bonding of SiCp/ZL101A composites was investigated. The effects of vibration on the interface structure, t
The effect of Cu on the microstructure and mechanical properties of 2519 aluminum alloy was investigated by means of tensile test, microhardness test, transmiss
YAG:Ce3+ phosphor particles were prepared using polyacrylamide gel method. The structure evolution of powders during annealing process was followed by X-ray dif
The hydrodynamic deep drawing process enables net shape or near net shape forming of complicated sheet metal parts made from difficultly forming materials, such
Although biometallic materials have been used as bone implant materials for a long time, they are still detected as foreign bodies by human immune system. Calci
The reverse microemulsion composition consisting of 37. 0% cyclohexane, 26.0% surfactant (TX-10and AEO9), 13.0% n-pentanol and 24.0% aqueous phase was investiga
External cooling technology is one of the key technologies to realize fast-casting-rolling process of aluminum, i.e. using compulsive cooling on the external su
The films of octadecene, dodecene, and undecenoic acid were prepared on H-terminated Si surface in the presence of ultraviolet irradiation. The resulted films w
Thermoelectric materials, Mg2Si1-xGex (x=0, 0.2, 0.4, 0.6, 0.8, 1), have been prepared by bulk mechanical alloying (BMA) and hot pressing (HP). The electrical c
This paper presents results of combustion synthesis (Self-Propagating High Temperature Synt hesis, SHS) of Si3N4under nitrogen with argon, hydrogen or ammonia.