取废旧遗弃的自动伞钢丝伞骨一根,截留该伞骨有固定用小孔的一端约15厘米。然后将该截取端置煤气炉或普通炉中烧红约4厘米长,待其自然冷却后(钢丝退火),用钳子弯成一小圆作手柄。另将有小孔的一端在小孔中间截断,余下一小半圆,再用小锉刀把截面锉润(不锉也可但易伤鱼口)即制成一理想的摘钩器。 Take a waste of abandoned automatic umbrella steel wire umbrella, retaining the umbrella with a fixed hole at the end of about 15 cm. Then cut the end of the gas stove or ordinary furnace to burn red about 4 cm long, to be naturally cooled (wire annealed), pliers bent into a small handle. Another end of the hole will be truncated in the middle of the hole, leaving a small semicircle, and then use a small file rasp section of the file Run (not filing but easy to hurt the fish mouth) that is made of an ideal pick hook.