设备的安装,一般由使用单位按照制造厂提供的图纸,根据有关标准规范设计设备基础并预留地脚螺栓孔,设备就位后,在其地脚孔内吊上地脚螺栓后置入预留孔内,浇灌混凝土,凝固后才能进行设备的安装与找正工作。此方法缺点是进度慢,不规范。 Equipment installation, the general use of the unit in accordance with the drawings provided by the manufacturer, according to the relevant standards and design equipment, foundation and reserve anchor bolt hole, the equipment is in place, in its foot hole after hanging anchor bolts into the pre- Leave the hole, pouring concrete, the equipment can be installed after installation and find work. The disadvantage of this method is slow progress, non-standard.