论文部分内容阅读
Effect of Preheating Temperature on Structural and Optical Properties of Sol-gel Derived Zn0.8Cd0.2O
【机 构】
:
State Key Laboratory of Silicate Materials for Architecture, Wuhan University of Technology, Wuhan 4
【出 处】
:
武汉理工大学学报(材料科学版)(英文版)
【发表日期】
:
2016年6期
其他文献
Hot deformation behavior of as-cast Mn18Cr18N austenitic stainless steel was studied in the temperature range of 950-1200 ℃ and strain rate range of 0.001-1 s-1 using isothermal hot compression tests. The true stress-strain curves of the steel were charac
The geopolymer samples were prepared with smelting waste slag of non-ferrous metal as the raw material and water glass as the activator. The effect of modulus of water glass and water binder ratio on the compressive strength was studied. The results show
Microstructural evolutions of the railway frog steel solidified under different pressure were studied using OM, FEGSEM, and TEM. The influences of pressure on the solidification, grain sizes, and mor-phology of carbides of the steel were analyzed. It is f
Synthesis and Physicochemical Properties of L-(+)-α-(Positive Butyl)-Leucine Ethyl Ester Chiral Ioni
L-(+)-α-(positive butyl)-leucine ethyl ester bromide chiral ionic liquid was synthesized by using microwave-assisted synthesis method and L-(+)-α-(positive butyl)-leucine ethyl ester terafluoroborate and hexafluorophosphate chiral ionic liquids were synth
A hot-press tackified preform was used to improve the uniformity of the laminates thickness and the mechanical properties of the obtained laminates were studied using vacuum assisted resin transfer molding (VARTM). Two modified preforms were prepared unde
Molecular dynamics (MD) simulations using the polymer consistent force field (PCFF) were adopted to investigate the pressure and thickness dependent density of squalane film in a nanogap at 373 K, with three different initial iflm thicknesses, and for a w
Effect of Zr, Hf, and Sn Additives on Elastic Properties of α2 -Ti3Al Phase by First-principles Calc
First-principles calculations within density functional theory have been carried out to inves-tigate α2 phase in the Ti3Al based alloy with Zr, Hf, and Sn (6.25at%) elements doped. The lattice constants, total energies and elastic constants were calculate
Mechanical Property and Microstructure of Alkali-activated Yellow River Sediment-Coal Slime Ash Comp
This work focuses on the production of a new composite material using Yellow River sediment and coal slime ash via alkali-activating method. XRD, FTIR and SEM/EDS were used to characterize the alkali-activated products and microstructure of the composite