国产数字化电源控制器在SSRF直线电源上的应用

来源 :中国物理C | 被引量 : 0次 | 上传用户:zhoufei123456
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
该国产数字化电源控制器采用先进的DSP和FPGA作为控制核心,采用了高精度的ADC作为数据采集单元,并且将模拟量和数字量进行有效的隔离,设计了较为先进的PID控制算法.控制器由DSP和ADC两块控制卡组成,嵌入电源,和电源有机地融成一体.控制器通过光纤与远程IOC进行实时通讯,通过本地PC机串行口可灵活调节电源回路参数,具有高稳定性和高重复性等优点.迄今为止该控制器作为进口瑞士PSI控制卡的替换产品,主要应用在SSRF的静态的中小功率开关电源上(100ppm以下),各项指标均能满足使用要求.与进口控制器相比,该控制器有较高的性价比. The domestic digital power controller adopts advanced DSP and FPGA as the control core, adopts high-precision ADC as the data acquisition unit, and effectively isolates the analog and digital, and designs a more advanced PID control algorithm. It consists of two control cards: DSP and ADC, embedded in the power supply and integrated with the power supply.The controller real-time communication with remote IOC through optical fiber, through the local PC serial port can flexibly adjust the power circuit parameters, with high stability And high repeatability, etc. So far the controller as a replacement for imports of Swiss PSI control card, mainly used in SSRF static small and medium power switching power supply (100ppm or less), the indicators can meet the requirements. Compared to the controller, the controller has a higher price.
其他文献
近年来,随着关节创伤、炎症或退行性关节疾病的不断增加,关节软骨病损的发病率也逐渐增高.磁共振成像(magnetic resonance imaging,MRI)具有高组织分辨率、多参数、多序列、
随着我国医疗保险事业快速发展,在越来越多保险理赔过程中,存在着许多借助病案进行医疗保险欺诈的事件,本文例举个案做浅析,呼吁尽快制定和出台适合我国国情的医疗保险法,不断完善
在不同情况下AOR和SOR方法有各自的优点,本文通过利用当一个线性系统的系数矩阵为(1,1)相容次序矩阵且它的Jacobi矩阵的特征值均为纯虚数或0时AOR迭代方法收敛的最佳参数以及
采用有限元技术,应用ANSYS仿真软件分析模态试验架的动态响应.通过建立计算模型,施加边界约束对模态试验架进行模态计算,得到模态试验架前5阶固有频率,提取计算模型的节点位
建立了能满足大面积热阴极系统需要的2MeV热阴极实验平台,并配合研制了直径为100mm的B型储备式热阴极.在二极管电压为1.8MV、脉宽90ns(FWHM)、阴极工作温度为1350℃情况下,利
束流寿命是衡量储存环性能的重要参数,它直接影响到储存环能否正常运行.采用束流损失探测系统通过探测束流损失的地点,可以为分析束损原因、优化机器参数和提高束流寿命提供
  在世界区域经济一体化的背景下,论证了西太平洋区域合作的 15种机制,并就西太平洋区域合作一体化机制建立问题提出了初步设想。 Under the background of regional econ
研究中国共产党的执政能力,绝不能离开执政基础特别是执政的经济基础 研究。中共十五大提出并由十六大进一步深化的社会主义基本经济制度,特别是其中提到 的公有制主体地位与
In this paper,a new higher order Wilson element is presented,and the convergence is proved.Then the interpolation postprocessing technique is used to obtain the
Let G=SU(n,1),K=S(U(n)×u(1)),and for l∈Z,let{η)1∈Z be a one-Dimensional K-type and let E1 be the line bundle over G/K associated to η.In this work we obtai