【摘 要】
:
A new nanometer-scale ferrite thin film with excellent high-frequency characteristics has been developed by the spray-spin-heating-coating method. The effects o
【机 构】
:
Institute of Information and Materials
论文部分内容阅读
A new nanometer-scale ferrite thin film with excellent high-frequency characteristics has been developed by the spray-spin-heating-coating method. The effects of the ion synthesis mechanism, chemical stoichiometry, fabrication method, and doping content on the magnetic properties and microstructure of the thin films have been analyzed.The films formed between 75℃ and 90℃ by spray-spin-heating-coating methods was discovered with fine grain size of about 21 nm, high saturation magnetization (4πMs) of about 6.5 kGs, coercivity of about 9.8 Oe, as well as initial permeability of about 14.0. These films can be widely used in radio-frequency integrated circuit devices.
其他文献
Effects of processing technology on the properties such as relative density, flexural strength, fracture toughness, hardness, etc. and the microstructure of rar
The study of recent years found that big bulk amorphous alloys were formed for some multi-element compositions at rapid cooling speed such as Zr-, La-, Fe-, Mg-
The forming-regions and properties were studied on phosphate system glasses Sm2O3 doped by two step melting method. It shows that with the increasing of rare ea
Phosphors with ( Ce0. 67 -xGdxTb0. 33 ) MgAl11 O19 (0 ≤ x ≤0.37 ) composition were prepared by sol-gel processing. The preparation process, crystal structure
Anodic dissolution behaviour of Ni in mono-, di- and trichloroacetic acids has been investigated by measuring current densities of Ni electrode (versus SCE) at
In this paper, undoped LaCl3 crystal growth was reported by modified Bridgman method.The starting materials used as charge for crystal growth was found to conta
The species and their formation constants in the ternary systems were obtained by the Scogs2 software from potentiometric titration data. The Comics software wa
The flow maldistribution and the effect of different inlet configuration on the flow distribution in platefin heat exchangers were studied experimentally. It is
The improvement of machining behavior of prehardened-mould steel for plastic is realized by using computer-aided composition design in this work. The results sh
The kinetics of bulk polymerization of octamethylcyclotetrasiloxane under acid circumstance is studied.A kinetic model is put forward and kinetic parameters are