【摘 要】
:
As a hybrid imaging modality that combines optical excitation with acoustic detection, photoacoustic tomography (PAT) has become one of the fastest growing biomedical imaging modalities. Among various types of transducer arrays used in a PAT system config
【机 构】
:
DepartmentofBiomedicalEngineering,UniversityatBuffalo,StateUniversityofNewYork,Buffalo,NY14260,USA
【出 处】
:
JournalofInnovativeOpticalHealthSciences
论文部分内容阅读
As a hybrid imaging modality that combines optical excitation with acoustic detection, photoacoustic tomography (PAT) has become one of the fastest growing biomedical imaging modalities. Among various types of transducer arrays used in a PAT system configuration, the linear array is the most commonly utilized due to its convenience and low-cost. Although linear array-based PAT has been quickly developed within the recent decade, there are still two major challenges that impair the overall performance of the PAT imaging system. The first challenge is that the three-dimensional (3D) imaging capability of a linear array is limited due to its poor elevational resolution. The other challenge is that the geometrical shape of the linear array constrains light illumination. To date, substantial efforts have been made to address the aforementioned challenges. This review will present current technologies for improving the elevation resolution and light delivery of linear array-based PAT systems.
其他文献
This paper presents a comprehensive review of recent advances in micro-additive manufacturing enabled by novel optical methods with an emphasis on photopolymerization-based printing processes. Additive manufacturing, also known as three-dimensional (3D) p
采用激光选区熔化技术制备24CrNiMo合金钢,研究不同扫描策略下成形件的显微组织、相组成和热疲劳性能。结果表明:24CrNiMo合金钢的显微组织由粒状贝氏体、马氏体和少量残余奥氏体构成。不同扫描策略下成形件的相组成均为α-Fe和少量γ-Fe,扫描策略对成形件相组成的影响较小。与旋转扫描策略相比,0°直线扫描策略下晶粒的生长具有较强的取向性;旋转扫描策略改变了相邻层间的散热方向,破坏了晶粒的外延生长模式,晶粒取向随机,显示出弱织构;0°直线扫描路径与热疲劳缺口的方向平行时,该扫描策略下的成形件具有最大的裂
用一台泰曼干涉仪,以压电晶体的逆压电效应补偿晶体电光效应所引起的光程变化,提供了一种简单、迅速和高灵敏度测量晶体电光系数的方法.
A novel broadband transmission method to determine polymer film thickness during manufacturing is proposed, and a measurement system is developed based on this method. The relationship between broadband optical power and film thickness is deduced accordin
大功率激光二极管线阵(HPLDA)特殊的发光区结构使它具有不理想的光学特性,特别是其快轴方向高达40°的大发散角,使得传统的波前探测器很难对其进行波前探测。针对这个问题,提供了一种可对大功率激光二极管线阵进行大动态范围波前测量的新方法,可在-π/2~π/2范围内进行高精度的波前斜率测量(±1′)。通过波前斜率的测量,可得到大功率激光二极管线阵的波前复振幅,实现波前测量的目的,同时也为下一步的光束整形做好准备。
A 60-GHz bidirectional radio-over-fiber (RoF) system using two-carrier-injected distributed feedback (DFB) laser is proposed and demonstrated to realize optical single sideband (SSB) modulation for downlink. An injection-locked Fabry-P′erot laser is also
The interaction of random laser and gain medium is important to understand the noise origin in random fiber lasers. Here, using the optical time domain reflectometry method, the time-resolved distributed acoustic wave generated by a Brillouin random fiber
ADC广泛应用于手持设备, 以及国防等领域。电ADC受限于时钟抖动和比较器模糊等关键指标, 性能基本接近理论极限, 提升空间有限。光ADC发挥了光子学的优势, 具有极大的带宽, 能实现远距离传输、远端处理, 是ADC发展的理想方向。光ADC能够很好地突破电ADC理论上的极限, 因此引起广泛关注。利用时间-波长交织、时间拉伸原理进行了光ADC的开发研究, 制做了高速光ADC样机, 进行了实验, 并分享了各项技术的细节。此外, 硅光集成技术将为光ADC技术打开新的窗口。
本文讨论了一种新型光电离预双放电TEA CO2激光器,该器件结构简单、性能可靠。研究了伏-安特性和掺入易电离辅助剂对放电稳定性的影响。最大比输入能量高达1.1千焦耳/升,激光振荡能量为60焦耳/升。