Texture Evolution and Dynamic Recrystallization of Zr-1Sn-0.3Nb-0.3Fe-0.1Cr Alloy During Hot Rolling

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:yoyo220
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In the present work,the sheets of Zr-1Sn-0.3Nb-0.3Fe--0.1Cr alloy were hot rolled with different reductions (10%,30%,50%,and 60%) at 1023 K and 1073 K.The microstructure evolutions including grain microstructure,texture,and dislocation were investigated,using electron backscattering diffraction and transmission electron microscope.The results showed that dislocation slip,twinning,and dynamic recrystallization (DRX) were the main deformation mechanisms.DRX was found to be promoted by larger reduction and higher rolling temperature.The predominant texture formed during hot rolling was basal //ND,whose intensity reached peak value after 30% reduction hot rolling.While the intensity of DRX texture //ND and //ND increased with increasing reduction and temperature.This study provided an effective way to tailor the texture and microstructure of the alloy,for optimizing process parameters.
其他文献
The first-principles study of the structural,elastic and electronic properties of the M2XC phases depending on the type of M transition metal (M are Ti and Cr) and on X (X are Ga and Al) was reported.The calculations are performed using the pseudo-potenti
The effect of impurity element Fe on corrosion behavior of AZ61 magnesium alloys in various states has been investigated by immersion test and hydrogen evolution measurements in 3.5% sodium chloride solution.The corrosion rate is found to relay on the imp
Bobbin tool friction stir welding (BT-FSW) is a variant of conventional friction stir welding (FSW).It can be used to weld complex curvature structures and closed sections by adding an extra shoulder instead of a rigid backing anvil,which expands the pote
In recent studies,critical research interest exists in the thermo-mechanical analysis of the friction stir welding (FSW) process by numerical simulation.In this review,the thermo-mechanical analysis for FSW is overviewed regarding the computational approa
In this work,the high-strength Mg-5Zn-2Al-2Sn (ZAT522,in wt%) Mg alloys was obtained at 220 ℃ and 130 ℃ by a two-step equal channel angular pressing (ECAP).For each stage,two passes were used.The results showed a remarkable grain refinement after the firs
Refill friction stir spot welding,also known as friction spot welding (FSpW),is a solid-state welding process suitable for spot joining of lightweight materials.Through the efforts of improving joint quality for similar and dissimilar materials,for exampl
Surface mechanical attrition treatment (SMAT) was carried out on hot-rolled AZ31 Mg samples along two orthogonal directions;as a result,two types of gradient structures with different grain sizes and texture components in different layers were produced.Th