【摘 要】
：
We investigate the optical properties of nanostructures of antimony sulfide (Sb2S3), a direct-bandgap semiconductor material that has recently sparked considerable interest as a thin film solar cell absorber. Fabrication from a nanop
【机 构】
：
CarlvonOssietzkyUniversität,InstitutfürPhysikandCenterofInterfaceScience,Oldenburg,GermanyUniversity
【出 处】
：
AdvancedPhotonics
论文部分内容阅读
We investigate the optical properties of nanostructures of antimony sulfide (Sb2S3), a direct-bandgap semiconductor material that has recently sparked considerable interest as a thin film solar cell absorber. Fabrication from a nanoparticle ink solution and two- and three-dimensional nanostructuring with pattern sizes down to 50 nm have recently been demonstrated. Insight into the yet unknown nanoscopic optical properties of these nanostructures is highly desired for their future applications in nanophotonics. We implement a spectrally broadband scattering-type near-field optical spectroscopy technique to study individual Sb2S3 nanodots with a 20-nm spatial resolution, covering the range from 700 to 900 nm. We show that in this below-bandgap range, the Sb2S3 nanostructures act as high-refractive-index, low-loss waveguides with mode profiles close to those of idealized cylindrical waveguides, despite a considerable structural disorder. In combination with their high above-bandgap absorption, this makes them promising candidates for applications as dielectric metamaterials, specifically for ultrafast photoswitching.
其他文献
AlPO4-SiO2 films doped with Rhodamine 6G (Rh6G) are prepared using the sol-gel dip-coating method. The surface morphology is characterized by atomic force microscopy. The results indicate that the surface morphology of the films is not significantly affec
为解决视觉车辆跟踪过程中尺度变化导致的模型漂移问题,在核相关滤波算法的基础上,提出一种车辆目标的尺度搜索算法。通过比较目标区域上三个特定尺度相关滤波响应的平均峰值相关能量,推断出目标尺度的变化方向,进而在变化方向上迭代搜索当前目标的最佳尺度。此外,为确保相关滤波模板能够适应运动过程中的车辆外观变化,在最佳尺度估计的情形下,对模板进行自适应加权更新,进一步提高模板准确性。大量的实验表明,本文算法可以
To avoid the ill-posedness in the inverse problem of bioluminescence tomography, a moment searching algorithm fusing the finite element method (FEM) with the moment concept in theoretical mechanics is developed. In the algorithm, the source's information
激光雷达作为大气主动遥感探测的重要手段之一，被广泛用于气溶胶和云层探测。基于简单多尺度层检测算法，通过添加尺度个数阈值，提出了一种在时均可提高云底反演高度准确性的云检测算法。该算法通过仿真云层内部多峰时的回波信号，得到了最优化尺度个数阈值范围；同时通过添加特征段合并有效减少了单层多峰情况下的漏判。分别使用微分零交叉法、简单多尺度法和改进后的算法对532 nm米通道激光雷达在2019年5~7月探测的20组探测时长75 min以上、结构稳定、时序上无突变的有效数据进行检测，并以微分零交叉法的云底高度为准，通过
Two nondestructive methods based on visible and near-infrared (VIS-NIR) spectroscopy and X-ray image have been used for the evaluation of watermelon quality. The prediction performance based on partial least squares (PLS) by diffuse transmittance measurem
大气折射是影响目标外弹道参数光学测量的重要因素之一,当对测量精度要求较高时,需对光学测量设备的折射误差进行修正。针对标准方法理论推导过程不够精确,计算过程中需要反复迭代的问题,根据光学测量设备的特点,以大气球面分层模型为基础,提出了基于测角交汇的大气折射修正方法。进行了仿真模拟和无人机飞行实验,结果表明,相比标准方法,该方法计算速度更快、修正精度更高。
让抛光的玻璃表面暴露在经过聚焦的千兆瓦级激光脉冲下，受照面就会粗糙起来，并发射小的玻璃碎片（飞溅)。由于这种损坏显然与所吸收的能量的多少有关，所以曾研究过对激光有各种程度的吸收能力的玻璃靶。
光学相干层析技术(OCT)是一种利用散射光相干原理进行成像的技术,具有无损、快速、高分辨率、断层成像等特点。物证鉴定要求尽量在不破坏物证原始状态下提取、检验、分析,获取有价值的信息,OCT作为一种光学检验技术能够满足该要求,其无需对样品进行预处理,就能实现相关物证的实时、原位、无损检验,在物证鉴定领域具有重要的应用价值。介绍了OCT的工作原理及其在物证鉴定领域中的应用。
非寝渐注入可导致电子束纵向速度随位置的摆动,因此采用寝渐注入为好。对于具有轴向磁场的情形,使电子束初始横向温度冷却和适当选择系统的参数可降低纵向速度的摆动幅度。