Numerical Simulation of the Multicomponent Mass Transfer during Bridgman Growth of CdZnTe Crystal Us

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:tiger_0003
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
To reveal the complicated mechanism of the multicomponent mass transfer during the growth of ternary compound semiconductors,a numerical model based on Maxwell-Stefan equations was developed to simulate the Bridgman growth of CdZnTe crystal.The Maxwell-Stefan diffusion coefficients in the melt were estimated.Distributions of Zn,Cd,and Te were calculated with variable ampoule traveling rate and diffusion coefficients.The experimental results show that Zn in melt near the growth interface decreases and diffuses from the bulk melt to the growth interface.For Cd,the situation is just the opposite.The coupling effects of Zn and Cd diffusions result in an uphill diffusion of Te at the beginning of the growth.Throughout the growth,the concentration of Te in the melt keeps low near the growth interface but high far from the growth interface.Increasing the ampoule traveling rate will aggravate the segregation of Zn and Cd,and hence deteriorate the uniformity of Te.We also find that not only the diffusion coefficients but also the ratios between them have significant influence on the species diffusions.
其他文献
Cassava residue was liquefied by using ethylene glycol (EG),ethylene carbonate,propylene carbonate and polyethylene glycol (molecular weight:400 g/mol) as the liquefaction reagent respectively at the temperature of 130-170 ℃ with sulfuric acid as the cata
Reuse of solid industrial wastes is an effective approach to develop low-carbon construction materials.This paper examines how two materials,steel slag(ST)and granulated blast-furnace slag(SL)impact the mechanical performance and pore structure of cement-
TiAlSiN coating was deposited on H13 hot work mould steel using cathodic arc ion plating (CAIP). The surface-interface morphologies and phases of the obtained coating were analyzed using field emission scanning electron microscopy (FESEM) and X-ray diffra
The growth habit of the basic magnesium oxysulfate whisker was investigated based on the theoretical model of anion coordination polyhedron growth units. It is found that typical basic magnesium oxysulfate whisker growth is consistent with anion tetrahedr
To improve the cyclic stability at high temperature and thermal stability, the spherical Al2O3-modified Li(Ni0.5Co0.2Mn0.3)O2 was synthesized by a modified co-precipitation method, and the physical and electrochemical properties were studied. The TEM imag
The dynamic tensile behaviors of a newly developed Ti-6Al-2Sn-2Zr-3Mo-1Cr-2Nb-Si alloy (referred as TC21 in China) over a wide range of strain rates from quasi-static to dynamic regimes (0.001-1200 s-1) at different temperatures were experimentally invest
The effect of multi-walled carbon nanotubes (MWCNTs) on the mechanical properties and microstructure of sulfur aluminate cement (SAC) composites was investigated. The dispersed MWCNTs were added into SAC in various weight contents.The results of mechanica
In order to obtain the suitable phase change material (PCM) with low phase change temperature and improve its heat transfer rate, experimental investigation was conducted. Firstly, different mass ratios of lauric acid (LA) and stearic acid(SA) eutectic mi