龙门刨床只能加工一定宽度尺寸的零件,当工件宽度超出其龙门宽度时,就不能加工了。我们在检修乌兰矿3米绞车时,需将两半组成的滚筒边接合面刨平。滚筒边的最大宽度是1.7米,我厂一台6米龙门刨床最大可刨削宽度为1.5米,若不改变加工方法,就无法完成这个零件的加工任务。为解决滚筒边接合面的加工问题,我们在6米龙门刨床操作台的对面、立柱的前方、约离立柱1.5米处安装一个1×1米的平台;平台用螺栓固定在基础上; Planer can only be processed a certain width of the parts, when the width of the workpiece beyond the width of its gantry, it can not be processed. When we overhaul the Wulan mine 3-meter winch, we had to platter the two sides of the drum-side joint. The maximum width of the drum side is 1.7 meters, I plant a 6-meter gantry planer maximum planing width of 1.5 meters, if you do not change the processing method, you can not complete the processing tasks of this part. In order to solve the processing problem of the roller side joint, we installed a 1 × 1 meter platform on the opposite side of the 6-meter gantry console and in front of the column about 1.5 meters away from the column; the platform is bolted to the foundation;