转炉挡渣滑板的改进

来源 :耐火与石灰 | 被引量 : 0次 | 上传用户:lookluo
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
为提高钢水质量,降低吨钢成本,减少转炉渣的影响,众多钢厂采用转炉滑板挡渣系统。在这套系统中,转炉挡渣滑板是耐材的核心,滑板寿命影响到系统的更换频率、生产节奏等。通过了解和研究现场挡渣滑板粘渣、夹钢等问题,发现内滑板和外滑板的损毁是不同部位和不同状态,分析了转炉挡渣滑板损毁机理。以现有转炉挡渣滑板材质工艺为基础,分别对内滑板进行了工艺改进,对外滑板进行材质开发和工艺改进。现场使用表明,在其他条件不变的情况下,改进的转炉挡渣滑板比原滑板使用次数大幅提高。
其他文献
采用“棒磨机+V型静选+动选”这种终粉磨工艺可同时生产锅炉脱硫用石灰石粉及建筑用细砂集料。实际应用发现主产品石灰石粗粉的粒径分布较好,符合脱硫剂的粒径分布要求,证明该终粉磨工艺生产脱硫石灰石粉是可行的。
With the importance of the steelmaking industry in the economy and its negative impacts on the environment, reducing dust emissions is a vital focus in this fie
稀土(RE)微合金化是开发高品质模具钢的重要手段之一.采用稀土渣系结合电渣重熔实现H 13钢铸锭的稀土添加,重点对比研究了稀土氧化铝渣系和氧化铝渣系所制备H13钢铸锭的成分
综述了钢渣在烟气脱硫方面的利用价值并简述了脱硫原理,介绍了利用钢渣制备微晶玻璃、多孔吸声材料、新型水泥的不同方法和高附加值利用现状,并指出了钢渣利用方面的不足。
通过热模拟实验,研究了冷却工艺参数对Ti微合金化高强钢组织和硬度的影响.结果表明:当终冷温度为700℃时,随着冷却速度的增大,铁素体和珠光体组织得到了显著细化,实验钢硬度
Vanadium-bearing titanomagnetite carbon composite briquette (VTM-CCB) was proposed as an innovative and promising blast furnace burden to realize low-carbon and
以β-环糊精为壁材、桉叶精油为芯材,通过冷冻干燥法制备用于纺织品芳香及抗菌整理的桉叶精油微胶囊,分析壁芯比、包埋温度和包埋时间对桉叶精油微胶囊包埋率的影响。通过正交试验确定最佳工艺条件为β-CD浓度8g/mL、包埋温度40℃、包埋时间2h。在该条件下桉叶精油微胶囊的包埋率为72.68%,包埋效果较好。
The effects of 0.01–0.11 wt.%Zr on the inclusions, microstructure, tensile properties, and impact toughness of the China low activation martensitic steel were i
The influences of superheat and cooling intensity on macrostructure and macrosegregation of one new kind duplex stainless steel (DSS) were studied. Thermal simu
Closing a single nozzle or multiple nozzles for a temporary casting operation (fewer strands casting) was common in a tundish due to insufficient molten steel o