1 气缸衬垫烧杯 当烧坏处呈一道小口时,可用石棉线填衬。烧坏面积较大时,可从废气缸垫的相同部位剪下一块贴补,其厚度应与原衬垫一样,将其扩建在烧坏处,并细心地轻轻敲击,使其接合良好。若烧坏处在两缸之间,则需将石棉线用钢皮包好。2 气缸垫穿孔 可用木棒试探孔的深度,若孔末贯通气缸,可用木楔堵孔口。3 散热器破漏 进出水软管若有少许破裂时,把一块大小合适 1 Cylinder liner beaker When burned at a small mouth, available asbestos line lining. Burn a larger area, you can cut off from the same part of the waste gas cylinder gasket patch, its thickness should be the same as the original liner, it will be expanded in the burnout, and gently tapping to make it well. If the burnout is between two cylinders, you need to use asbestos wire wrapped in steel. 2 cylinder pad pierce hole can be used to test the depth of the hole, if the end of the hole through the cylinder, available wedge hole blocking. 3 radiator leakage into the water hose if a little rupture, the size of a suitable