【摘 要】
：
Dimethyl phthalate (DMP), used as a plasticizer in industrial products, exists widely in air, water and soil. Staphylococcus aureus is a typical model organism representing Gram-positive bacteria. The molecular mechanisms of DMP toxicology in S. aureus we
【机 构】
：
School of Life Science and Agriculture Forestry,Qiqihar University,Qiqihar,Heilongjiang 161006,China
论文部分内容阅读
Dimethyl phthalate (DMP), used as a plasticizer in industrial products, exists widely in air, water and soil. Staphylococcus aureus is a typical model organism representing Gram-positive bacteria. The molecular mechanisms of DMP toxicology in S. aureus were researched by pro-teomic and transcriptomic analyses. The results showed that the cell wall, membrane and cell surface characteristics were damaged and the growth was inhibited in S. aureus by DMP. Oxidative stress was induced by DMP in S. aureus. The activities of succinic dehydrogenase (SDH) and ATPase were changed by DMP, which could impact energy metabolism. Based on proteomic and transcriptomic analyses, the oxidative phosphorylation pathway was en-hanced and the glycolysis/gluconeogenesis and pentose phosphate pathways were inhib-ited in S. aureus exposed to DMP. The results of real-time reverse transcription quantitative PCR (RT-qPCR) further confirmed the results of the proteomic and transcriptomic analyses. Lactic acid, pyruvic acid and glucose were reduced by DMP in S. aureus, which suggested that DMP could inhibit energy metabolism. The results indicated that DMP damaged the cell wall and membrane, induced oxidative stress, and inhibited energy metabolism and activation in S. aureus.
其他文献
摘要：为分析既有建筑物增设地下空间托换桩的稳定性，利用Ansys建立增设侧向支撑的钢筋混凝土桩的三维有限元模型，通过改变桩周土水平抗力系数的比例系数、桩周土开挖深度、桩身截面边长、桩身配筋率和载荷偏心距等参数，分析桩的受压极限承载力和相應支撑轴力的变化规律。结果表明：桩受压极限承载力和相应支撑轴力随载荷偏心距和桩周土开挖深度的增大而减小，随着桩周土水平抗力系数的比例系数、桩身配筋率和桩身截面边长的
The behavior and mechanism of Li leaching from lithium aluminum silicate glass-ceramics which can be used as a secondary source of Li using aqueous NaOH solution was investi-gated. The Li leaching efficiency is increased with increasing concentration of N
顱骨正面被砸得粉碎， 那是被钝器所伤，一击毙命……
摘要：为研究基于等离子流动控制的减阻技术，基于Langtry-Menter转捩模型提出边界层转捩数值模拟技术。该技术可有效结合转捩模型与湍流模型，用标准模型验证其精确性，为采用等离子流动控制抑制边界层分离和转捩研究提供数值模拟平台。采用基于现象学模型的等离子流动控制数值模拟技术，对流动分离以及边界层转捩抑制进行数值模拟，为基于等离子流动控制的翼型减阻技术提供参考。 关键词：等离子流动控制;流动分
摘要：为研究超高层、超大空间建筑的抗震性能，以超高层立式交联电缆的高压立塔为研究对象，以基底剪力、最大层间位移角和最大位移为分析参数，采用剪力墙结构体系对塔楼结构进行研究。利用midasBuilding软件进行不同地震作用下的抗震性能分析，研究结果表明：罕遇地震作用下塔楼的基底剪力约为多遇地震作用下基底剪力的3.34～3.95倍;罕遇地震作用下塔楼横向位移最大值为54.054mm，层间位移角最大值
The black soldier fly larvae (BSFL) have been successfully applied to treat various organic wastes. However, the impacts of heavy metals on antibiotic resistance in the BSFL guts are poorly understood. Here, we investigated the effect of copper (exposure
摘要：为分析某型自润滑杆端关节轴承的结构、制造工艺和疲劳寿命是否满足使用要求，基于Abaqus软件建立该轴承的有限元模型，通过对产品动态加载和轴承-杆端体过盈装配进行仿真分析和试验验证轴承结构的科学性，通过对外圈挤压和车削过程进行工艺优化仿真提高轴承的密合度，通过对轴承铆压固定和轴向推出过程进行仿真确保铆压固定性能满足要求。基于杆端体S-N曲线，计算轴承疲劳寿命，并通过磨损仿真获得轴承25000次
摘要：为准确分析桩体宏观变形与周围土颗粒细观力学行为，采用离散元-有限差分的跨尺度耦合进行桩和土体接触过程中的稳定性分析，研究桩下沉过程中周围土体的细观变形、应力分布和桩体自身变化情况，通过FLAC3D建立桩和外部土体有限差分网格单元，对桩周围侧土体应用PFC3D离散元建立土颗粒微观结构模型。研究结果表明：离散元与有限差分耦合方案能够模拟桩周围土体细观力学行为;外部区域土体位移場呈包裹式C形对称分
摘要：为探究温度循环载荷下排气净化器的热疲劳性能，结合传热分析和静力学分析，采用有限元软件HyperMesh和Abaqus，对某型乘用车排气净化器进行深入研究，考虑高温效应和材料硬化效应的影响，选择等效塑性应变幅值作为评价热疲劳的关键指标，分析得到危险点等效塑性应变幅值为0.0117，不满足热疲劳耐久要求。对原排气净化器的下支架进行翻边处理，得到的新排气净化器的等效塑性应变幅值最高为0.0087，
摘要：为研究某工业厂房井字梁楼盖在简谐载荷作用下的异常振动问题，根据现场动力特性测试结果，采用有限元软件Abaqus建立井字梁楼盖局部板-柱模型，通过增设调谐质量阻尼器（tunedmassdamper，TMD）和布置隔振器对井字梁楼盖的竖向振动研究进行控制。结果表明：增设TMD和布置隔振器均可以使楼盖竖向振动峰值加速度减小;选择4个质量比为2%的TMD布置在设备支座附近梁下，通过布局优选可以得到最