论文部分内容阅读
TiaAl-Nb-Mo composites were prepared by SHS using initial powder mixtures of Ti-Al-Nb-Mo and their corrosion and mechanical properties were studied to develop bio-and environmental materials. The composites reached 99.8% of theoretical densityafter the direct consolidation. The composites shows equiaxed primary α2 in a matrixof fine secondary α2 plates and ordered B2 (B0) forming a basket weave structure.The strain rate sensitivity (m = dlnσr/dlne) at 2% strain is 0.008. Corrosion po-tential and corrosion rate of the composites formed by SHS were -151.5mVSHE and5.72× 10-8A/cm2 for Ti3Al-10Nb-1.5Mo and -138.4m VSHE and 4.12×10-8cm-2 forTi3Al-12Nb-1.5Mo in a 50% NaOH-10%FeCl3 solution, respectively. Corrosion resis-tance decreased with niobium content in the composites and chloride content in theaqueous solution. Selective corrosion of α2 phase in a matrix occurred in the corrosionenvironment which suggests that the corrosion potential and rate changes are relatedto the niobium content and α2 phase in a matrix.