微盘谐振腔支撑柱子对模式损耗的影响

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:zhangyili164958807
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Mode radiation loss for microdisk resonators with pedestals is investigated by three-dimensional (3D) finite-difference time-domain (FDTD) technique. For the microdisk with a radius of 1 \mu m, a thickness of 0.2 \mu m, and a refractive index of 3.4, on a pedestal with a refractive index of 3.17, the mode quality (Q) factor of the whispering-gallery mode (WGM) quasi-TE7;1 first increases with the increase of the radius of the pedestal, and then quickly decreases as the radius is larger than 0.75 \mu m. The mode radiation loss is mainly the vertical radiation loss induced by the mode coupling between the WGM and vertical radiation mode in the pedestal, instead of the scattering loss around the perimeter of the round pedestal. The WGM can keep the high Q factor when the mode coupling is forbidden.
其他文献
期刊
The hollow core photonic crystal waveguide biosensor is designed and described. The biosensor was tested in experiments for artificial sweetener identification in drinks. The photonic crystal waveguide biosensor has a high sensitivity to the optical prope
BST
期刊
用热电二极管探测了热管炉中Ba原子Rydberg态的双光子吸收脉冲信号,对信号的幅度、信号峰值和出现时间与气压、温度、偏压、作用区位置的关系进行了实验观察和理论分析.
期刊
期刊
研究了CO2激光辐照对PZT-4陶瓷介电性能的影响。在一定的激光辐照功率密度下,PZT-4陶瓷的介电常数下降约5%,介电损耗下降约60%,矫顽场增加。结合拉曼光谱、扫描电子显微镜、X射线衍射以及后退火处理探讨了激光辐照PZT-4陶瓷的改性机理,结果表明,激光辐照后陶瓷介电性能的变化主要与其微结构有关,辐照使得陶瓷产生了较大的张应力,晶格常数变大,B位离子更容易偏离氧八面体中心,氧八面体扭曲,使其电畴活性下降,阻碍了极化翻转,材料性能变“硬”。
In this paper, the Raman spectrum signal de-noising based on stationary wavelet transform is discussed. Haar wavelet is selected to decompose the Raman spectrum signal for several levels based on stationary wavelet transform. The noise mean square {sigma}
对基于变形镜(DM)生成的Airy光束进行了光束特性研究。采用Zernike多项式对立方相位进行分解,建立了由多个Zernike多项式线性组合的相位调谐模型,并对组合中的每一个Zernike多项式引入一个系数。模拟分析了不同Zernike多项式系数对Airy光束结构和光束质量的影响。利用69单元变形镜进行了Airy光束生成实验,测试分析了不同系数组合下的Airy光束强度分布,通过控制Zernike多项式系数实现了Airy光束特性的控制。
针对传统阴影叠栅轮廓术深度测量范围有限的问题,根据阴影叠栅条纹对比度的变化特点,提出了大深度范围内的阴影叠栅轮廓新型测量方法。该方法将光栅置于不同的高度,在物体表面形成叠栅条纹,通过将不同高度范围内的条纹相位测量结果相互融合,实现了大深度范围内的阴影叠栅轮廓测量。分析了光栅处于不同位置时叠栅条纹的相位分布特点,提出了基于重叠区域的相位融合方法和误差补偿方法。通过实验验证了所提出方法的可行性和准确性