Multiphoton ionization of acetone-water clusters at 355 nm

来源 :Optoelectronics Letters | 被引量 : 0次 | 上传用户:zengqz
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The multiphoton ionization of acetone-water clusters were detected at 355 nm laser wavelength by using the time of flight mass spectrometer(TOF-MS).The experiments show that all products are protonated.Three main products such as (CH_3COCH_3)_n-(H_2O)_ n-2 H+,(CH_3COCH_3)_n-(H_2O)_ n-1 H+ and (CH_3COCH_3)_n-(H_2O)_nH+ are concluded from the results.In order to study the equilibrium structures of the (CH_3COCH_3)_n-(H_2O)_ n-2 H+,the ab-initio calculation is used on them.The experiment is even done when the volume rate of acetone to water is 1∶2. The multiphoton ionization of acetone-water clusters were detected at 355 nm laser wavelength by using the time of flight mass spectrometer (TOF-MS). The experiments show that all products are protonated.Three main products such as (CH_3COCH_3) _n- (H_2O ) _ n-2 H +, (CH_3COCH_3) _n- (H_2O) _n-1 H + and (CH_3COCH_3) _n- (H_2O) _nH + are concluded from the results.In order to study the equilibrium structures of the (CH_3COCH_3) _n- (H_2O) _ n-2 H +, the ab-initio calculation is used on them. The experiment is even done when the volume rate of acetone to water is 1: 2.
其他文献
文章论述了90年代世界科技经济发展的十大主要趋势,认为在这种形势下加快我国高新技术开发区的改革与发展有着深远的战略意义,即有利于进一步改善与优化出口产品与出口商品结
前言本文对大型铸锻件电渣焊缝的超声波探伤质量检验标准,进行了分析,提出了初步的建议,并总结了二十年来,我国几个典型的大型铸锻件电渣焊缝质量检验情况及产品的使用情况,
我厂用分段组合劈箱造型工艺,生产B2016龙门铇床身铸件。经两年多来的实践证明,分段组合劈箱造型生产大型铸件,与采用地坑造型或整体砂箱造型相比,具有如下优点: 1.提高了车
Laser phenomena in random media have been studied based on the localized theory for lightwave in random media. The relationship between random lasing modes and
第一章经济法总论本章历年所占分值比重较小,一般为客观题,分值为3分左右。但也不能完全排除主观题中结合本章的内容,比如诉讼时效。学习本章应以掌握基本概念为主。一、经
用圆形或平面拉刀以及有齿升的推刀加工时,已加工表面的粗糙度和切屑形成条件与分屑槽的宽度S_k,各分屑槽的轴线之间的距离b有关。若用圆形分屑槽沿切屑宽度分屑,那末,已加
呈背斜状穹窿构造的机理有三种:有由盐丘形成的,有由深成岩岩盖形成的,还有由基岩块段上升形成的。在这些穹窿上生有许多断层,穹窿形成时的断层模式主要影响着穹窿外形与区域
一、铬尖晶石成分与晶胞、比重的关系1955年米赫耶夫提出尖晶石类总的晶胞公式为: (单位kx) 两价平均离子半径 三价平均离子半径 First, chromium spinel composition and
高温钎焊钎接的零件强度好、变形小、表面光洁度好,在轻工、机械和航空部门都得到广泛的应用。现有的高温钎焊设备除使用高频感应和盐浴炉外,多用电阻炉。为了提高钎焊质量
AAA(m=2~8毫米)和AA 级精密滚刀分别用于加工5级和7级(OCT1643—72)齿轮。AAA 级滚刀按部门标准OH431/5—62规定制造;AA 级滚刀按OCT9324—60规定的技术条件制造。这两种精度