手锤柄的安装,通常都采用加斜楔的方法,但在使用中,由于力与振动,容易产生松动,甚至锤头飞出伤人。本文介绍一种新的安装方法。将锤柄一端加工至能伸进锤孔,达到使周边配合良好,两手用力拉不开的程度,并且使木柄长出10mm。然后将锤垂直放置,锤部朝上,用锤边向四周敲砸锤部长出的10mm Hand hammer handle installation, usually using plus wedge method, but in use, due to force and vibration, prone to loosening, and even the hammer fly out wounding. This article describes a new installation method. One end of the hammer handle can be processed to reach into the hammer hole, so that the surrounding with a good, both hands pull hard to the extent that the wooden handle and grow 10mm. Then the hammer is placed vertically, with the hammer upwards, 10mm