【摘 要】
:
16.6%Co/γ-Al2O3 catalysts prepared by incipient wetness impregnation method were used for Fischer-Tropsch synthesis.The support was pre-treated with different
【机 构】
:
State key Laboratory of Chemical Engineering,School of Chemistry and Chemical Engineering,Yankuang E
论文部分内容阅读
16.6%Co/γ-Al2O3 catalysts prepared by incipient wetness impregnation method were used for Fischer-Tropsch synthesis.The support was pre-treated with different concentration of NH4NO3 aqueous solution.The effect of support pre-treatment on the properties of support and performance of supportedcobalt-based catalysts was investigated.To treat the support with NH4NO3 aqueous solution enlarged the pore of γ-Al2O3,decreased the impurity Na2O content,and weakened the surface acidity of,γ-Al2O3.The change in the properties of the support decreased the interaction between cobalt species and support,enhanced the CO hydrogenation rate and the C5+ selectivity.For all catalysts,increasing the reaction temperature increased the CO hydrogenation rate or the CO conversion,slightly decreased the total hydrocarbon selectivity,and favored the formation of methane and light hydrocarbons.while the chain growth probability decreased.For 16.6%Co/γ-Al2O3 catalysts.prepared with the support treated with 100 g/L NH4NO3 aqueous solution,the CO conversion,the CH4 selectivity,and the C5+ selectivity were 83.13%,6.86% and 82.75% respectively,and the chain growth probability was 0.83 under the condition of 493 K,1.5 MPa,500 h-1 and the molar ratio of H2 to CO being 2.0 in feed.
其他文献
The chemical reduction of CO2 remains a challenge with respect to the reversal of the oxidative degradation of any organic materials.The conversion of CO2 into
The well-known binary Legendre sequences possess good autocorrelation functions and high linear complexity,and are just special cases of much larger families of
Laser direct deposition (LDD) of metallic components is an advanced technology of combining CAD/CAM (computer aided design/computer aided manufacturing), high p
The rate determining step and the energy barrier involved in hydrogen adsorption on Pt/WO_3- ZrO_2 were studied based on the assumption that the hydrogen adsorp
In this article the hard-sphere Discrete Particle Model (DPM) is used to study the mixing behavior of particles in the 2-D fluidized bed. Different flow pattern
The coupling reaction of formaldehyde (FA) and methyl formate (MF) to form methyl glycolate (MG) and methyl methoxy acetate(MMAc),catalyzed by p-toluenesulfonic
The effects of Manganese (Mn) incorporation on a precipitated iron-based Fischer-Tropsch synthesis (FTS) catalyst were investigated using N2 physical adsorption
Praseodymium β-diketone chelate, Pr(DPM) 3 [DPM=2,2,6,6-tetramethyl-3,5-heptanedionato], was successfully synthesized from the inorganic salt praseodymium chlo
The plane-wave pseudopotential function method, based on density-functional theory, has been used to calculate the adsorption, electronic band structures, orbit
Many software systems are developed in a number of consecutive releases.In each release not only new code is added but also existing code is often modified.In t