福山厂的6号连铸机是为了替代已陈旧的3号连铸机而建设的，其目标是实现优质、高产和低成本。该连铸机系立弯型、单流板坯连铸机，垂直段长3m、冶金长度为49m。没有17m长，由紧密排列的传送辊组成的轻压下带，以防止高速浇铸时在凝固末期出现偏析。中间包容量为80t。浇铸的板坯 Fukuyama Plant’s No. 6 continuous casting machine was built to replace the old No. 3 continuous casting machine, with the goal of achieving high quality, high yield and low cost. The continuous casting machine is vertical bending type and single-flow slab continuous casting machine with vertical section length of 3m and metallurgical length of 49m. There is no 17m long, lightly pressed belt consisting of closely spaced conveyor rollers to prevent segregation at the end of solidification during high speed casting. Tundish capacity of 80t. Cast slab