低损耗脉冲电源的特点是电极损耗小,脉冲宽度为30μS,光洁度达▽6时的电极损耗小于10%。以往的型腔模加工,是在机加工后由钳工修正总装。但因机加工在型腔四周、清角处、型腔中侧部、台价和圆角等处的余量较多,所以钳加工的工作量很大。若采用低损耗电源电加工,只须用一只紫铜成形电极,即可进行加工,同样能达到预期的目的。使用低损耗电源还可以把型腔的整体加 The low-loss pulsed power supply features low electrode loss, a pulse width of 30μS and an electrode loss of less than 10% with a finish of ▽ 6. Cavity mold processing in the past, is the machined after the fitter to amend the assembly. However, due to machining in the cavity around the Qing Kok, the cavity in the side, the price and fillet, etc. more margin, so a lot of heavy workload of the clamp. If the use of low-loss power processing, just use a copper forming electrode, can be processed, the same can achieve the desired purpose. The use of low-loss power supply can also increase the overall cavity