配置Nortel Networks(北电网络)路由器有两种方法。一种是通过NortelNetworks路由器的配置端口(Console),利用PC机或终端来配置;一种是利用两络通过Telnet命令和利用Nortel Networks提供的GUI路由器配置软件Site Manager来配置。不过采用第二种方法时,要求用户己经正确地配置了使路由器接入LAN的IP地址,使之IP可达。相比较而言,第一种方法更具有通用性。下面分别介绍这两种方法。 There are two ways to configure Nortel Networks routers. One is through the configuration port of the Nortel Networks router using a PC or terminal to configure; the other is to configure using two-telnet via Telnet commands and using the GUI router configuration software Site Manager provided by Nortel Networks. However, when the second method is used, the user is required to have correctly configured the IP address for the router to access the LAN so that the IP is reachable. In contrast, the first method is more versatile. The following describes each of these two methods.