【摘 要】
:
To improve the cycle performance of spinel LiMn2O4 as the cathode material of 4 V class Li secondary batteries,LiNixMn2-xO4 (x=0~0.3) samples were prepared using
【机 构】
:
Department of Chemistry,State Key Laboratory for Corrosion and Protection
论文部分内容阅读
To improve the cycle performance of spinel LiMn2O4 as the cathode material of 4 V class Li secondary batteries,LiNixMn2-xO4 (x=0~0.3) samples were prepared using a simple precipitation method, and the effects of Ni doping on the physical properties and electrochemical performance of the samples were investigated using various methods. All LiNixMn2-xO4 (x=0~0.3) compounds show a single spinel phase, and the lattice parameter (a), the unit cell volume (v) and particle size decrease with increasing Ni content. The results of the electrochemical experiments showed that the initial charge-discharge capacity of LiNixMn2-xO4 samples in the 3.0~4.4 V range decreases with increasing Ni content except for pure LiMn2O4; however, the capacity in the 4.4~4.9 V range increases with the increasing Ni content. For spinel samples Ni substitution can contribute to the improvement of their cycle performance due to the formation of the stronger Ni-O bond, homogeneous morphology, and sub-micron sized particles, and the sample with x=0.05 has larger peak currents, higher initial capacity and better cycling capability due to its lower electrochemical and diffusion polarization than those of other samples.
其他文献
Ce0.6Zr0.3RE0.1O2(RE=Y, La, Pr, Tb)solid solutions were prepared by co-precipitation technique and characterized by a series of methods. XRD and FT-Raman result
A nonlinear optical (NLO) active alkoxysilane chromophore (SGDR1) was synthesized. A fluorinated polyimide/SGDR1 composite was prepared to improve the poor temp
The mechanism of the improvement of the cycling stability of the La-Mg-Ni-Co based hydrogen storage alloy electrode was systematically investigated. The results
A high-current pulsed electron beam(HCPEB) generated on the system of Nadezhda-2 was applied to improve the microstructure and performance of 0.20% C low carbon
The possibility of ultra-thin Y2O3 (yttrium sesquioxide) films as insulator of metal ferroelectric insulator semiconductor (MFIS) structure was investigated. Th
In order to research the microstructure of TiAl alloy and TiAl-mould reaction between TiAl and ceramic mould shells prepared with the low cost binder in investm
As the important evaluation parameters concerning the spray qualities, the porosity and surface roughness of the coatings obtained by thermal spray forming have
This paper introduces a video application-aware cross-layer framework for joint performance-energy optimization,considering the scenario of multiple users upstr
Bismuth oxide has wide applications in superconductive material, photoelectric material, electronic ceramic, electrolyte, and catalysts. To produce ultrafine bi
Al-1.0%Si alloy rods containing unidirectional microstructures were fabricated by continuous unidirectional solidification (CUS) process. The crystal growth ori