论文部分内容阅读
A switched-capacitor amplifier with an accurate gain of two that is insensitive to component mismatch is proposed.This structure is based on associating two sets of two capacitors in cross series during the amplification phase.This circuit permits the common-mode voltage of the sample signal to reach full swing.Using the charge-complement technique,the proposed amplifier can reduce the impact of parasitic capacitors on the gain accuracy effectively.Simulation results show that as sample signal common-mode voltage changes,the difference between the minimum and maximum gain error is less than 0.03%.When the capacitor mismatch is increased from 0 to 0.2%,the gain error is deteriorated by 0.00015%).In all simulations,the gain of amplifier is 69 dB.
A switched-capacitor amplifier with an accurate gain of two that is insensitive to component mismatch is proposed. This structure is based on associating two sets of two capacitors in cross series during the amplification phase. This circuit permits the common-mode voltage of the sample signal to reach full swing. Using the charge-complement technique, the proposed amplifier can reduce the impact of parasitic capacitors on the gain accuracy effectively. Simulation results show that as sample signal common-mode voltage changes, the difference between the minimum and maximum gain error is less than 0.03% .When the capacitor mismatch is increased from 0 to 0.2%, the gain error is deteriorated by 0.00015%.) In all simulations, the gain of the amplifier is 69 dB.