本文叙述了用于大型空间平台结构的石墨环氧柱形部件的制造程序。未浸树脂的干纤维缠绕在 LMSC 立式缠绕机的锥形铝芯轴上,树脂加注在芯轴和外套筒之间。当端部联接件整体地缠绕时,在铝芯轴上固化的管子会引起热膨胀问题,为了把此问题减低到最小,缠绕和树脂加注均在高温下进行。 This article describes the manufacturing process for graphite epoxy cylindrical parts used in large space platform structures. The resin-free dry fibers are wound on a conical aluminum mandrel of an LMSC vertical winder with resin reinserted between the mandrel and the outer sleeve. When the end couplings are integrally wound, tubes that cure on the aluminum mandrel cause thermal expansion problems. To minimize this problem, both the winding and the resin infusion are performed at elevated temperatures.