【摘 要】
：
An investigation was carried out to study the effects of γ' formation and strengthening elements (At, Ti and Ta) on the microstructure and stress rupture prope
【机 构】
：
Materials Science and Engineering School,Department of Superalloy,General Machinery Plant of Liaohe
论文部分内容阅读
An investigation was carried out to study the effects of γ' formation and strengthening elements (At, Ti and Ta) on the microstructure and stress rupture properties of nickel base single crystal super-alloys. The results show that with the increase of γ' formation and strengthening elements, the percentage of γ-γ' eutectic and the misfit degree of γ/γ' increases. Detailed microstructural analysis revealed that with the increase of γ' forming element content, the morphology of γ' changed from spherical to cubic, then irregular shape; and the size of γ' increases gradually. Excessive γ' formation and strengthening elements will lead to the precipitation of μ phase during stress rupture tests. The alloy with 5wt.%AI, 1wt.%Ti and 6wt.%Ta has the best stress rupture property.
其他文献
Recently unstructured dense point sets have become a new representation of geometric shapes. In this paper we introduce a novel framework within which several u
In this paper, a novel approach is proposed for denoising of Chinese calligraphy tablet documents. The method includes two phases: First, a partial differential
以Fe、Si粉为原料,添加微量Cu,采用场激活的方法一步完成β相FeSi2的合成、致密和退火.本文分析研究了微量Cu对材料合成速度和显微组织的影响,结果表明:微量Cu能够显著提高材
高纯度的氮气中,以Al-Mg-Y合金为母合金,利用Lanxide技术合成了含烧结助剂Y2O3的复合AlN粉体.通过扫描电镜、X射线衍射、粒径分析及化学成分分析等检测手段对氮化产物进行表
介绍了超声疲劳试样的设计计算方法,给出了谐振状态下不同形式、尺寸试样中沿其谐振长度方向的位移、应力分布.结果表明:狗骨形试样中,中间等截面段尺寸对试样中应力的大小、
针对电能质量暂态扰动信号的不规则性和突变性特点，提出了一种基于滑动去趋势波动分析的电能质量扰动检测新方法。扰动的发生使原信号的相关性特征发生变化，而去趋势波动分析的
采用溶液相转移法,通过特殊结构的纺丝喷头,制备了品字形PVDF中空纤维膜,讨论了PVDF固含量和芯液组成对品字形膜形态结构和性能的影响。结果表明,随PVDF固含量的增大,品字形
研究了萘基薁并[2,1-d]嘧啶-4-胺类衍生物的合成方法.以托酚酮、萘乙酸乙酯、N,N-二甲基甲酰胺二甲缩醛(DMF-DMA)及芳香胺为原料,依次经过氯代、缩合、环加成、环化反应得到
以2-二茂铁基苯并咪唑(2)为原料,合成了1-甲基-2-二茂铁基-3-乙基苯并咪唑碘盐(4)和六氟磷酸盐(5);甲酰化的2,2-双二茂铁基丙烷(6)与邻苯二胺在甲醇作溶剂,回流,碘催化下反应
为解决终端滑模控制在系统远离平衡点时收敛速度较慢以及在平衡点附近存在高频抖振的问题,提出一种用于直升机控制的双层模糊终端滑模控制策略。该方法综合了终端滑模控制和