一防松动蓄电池在车上固定必须牢固，否则由于车辆的颠簸，将使极板上的活性物质脱落，蓄电池外壳破裂，导线与接柱松脱，造成接触不良。在安装蓄电池时，应用橡胶垫、毛毡垫将其垫好，用木板等将其“挤牢”，防止振动。二防爆炸因为蓄电池在充电时释放的可燃气体在达到一定浓 An anti-loose battery fixed in the car must be solid, or because of the vehicle’s bumpy, will make the active material on the plate off, the battery shell rupture, loose wire and post, resulting in poor contact. In the installation of batteries, the application of rubber pads, felt pads pad it good, with wood, etc. will be “squeezed” to prevent vibration. Two anti-explosion because the battery charge when the release of combustible gas at a certain concentration