Processing and mechanical properties of SiC particulate reinforced AZ91 composites fabricated by sti

来源 :中国有色金属学会会刊(英文版) | 被引量 : 0次 | 上传用户:A88833238
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The influence of stirring parameters (stirring temperature, stirring speed and stirring time) on the particle distribution of 10%(volume fraction) SiC particulate reinforced AZ91 composites (SiCp/AZ91) was studied. It is found that it is necessary for 10 μm SiC particulate reinforced AZ91 composites to stir the molten composites in semi-solid condition with vortex formation, or else the cluster of the reinforcements would not be eliminated. Compared with the monolithic alloy, the SiCp/AZ91 composite has higher strength, especially for yield strength, but the elongation is reduced. For the as-cast composite, the particles often segregate within the grain boundary regions. Extrusion can effectively reduce the segregation of SiC particles and improve the mechanical properties of the composite. The extrusion-induced reduction in particle size varies with extrusion temperatures and extrusion ratios. The effect of extrusion-induced reduction in particle size on the mechanical properties of the composites is not always beneficial.
其他文献
以鸭疫里默氏杆茵血清1型(RA 1)基因组文库中筛选获得的一种"保守假定蛋白P25"基因的重组表达产物为包被抗原,建立了检测RA血清抗体的间接ELISA.诱导表达的重组P25蛋白纯化后
A promising method of ferroelectric domain inverted structures was demonstrated, which allows us to fabricate thicker domain inverted patterns by applying a low
A multi-channeled filter based on branchy defect in a microstrip photonic crystal was proposed. By introducing a branchy structure across the defect region, mul
Cu47Ti34Zr11Ni8 bulk metallic glass (BMG) matrix composites containing in situ formed TiC particles and δ-TiCu dendrite phase were developed by copper mold cas
Laser engineered net shaping(LENS) process was investigated using Co-based superalloy powder with a high power continuous wave CO2 laser. Thin wall part with sm
Ge-Ga-Ag-S chalcogenide glasses with the composition Ge30Ga3Ag4S63 were obtained by the conventional melt-quenching method. According to the visible-infrared an
Grain boundary character distribution (GBCD) in the vicinity of clad-core interface in annealed aluminum brazing sheet was investigated by EBSD technique. The r
ULTIMET(R) alloy is a cobalt-based superalloy that undergoes a deformation-induced phase transformation from a face-centered-cubic (fcc) phase to a hexagonal-cl
A two-step anodizing process was used to prepare wide-range highly ordered porous anodic alumina membrane (PAA) in the electrolyte of oxalic acid. The effects o
Straight carbon nanotubes (CNTs) were achieved by simple thermal chemical vapor deposition(STCVD) catalyzed by Mo-Fe alloy catalyst on silica supporting substra