Modeling the triaxial behavior of riverbed and blasted quarried rockfill materials using hardening s

来源 :Journal of Rock Mechanics and Geotechnical Engineering | 被引量 : 0次 | 上传用户:lm403379799
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Riverbed modeled rockfill material from Noa Dehing dam project,Arunachal Pradesh,India and blasted quarried modeled rockfill material from Kol dam project,Himachal Pradesh,India were considered for this research.Riverbed rockfill material is rounded to sub-rounded and quarried rockfill material is angular to sub-angular in shape.Prototype rockfill materials were modeled into maximum particle size(d_(max)) of 4.75 mm,10 mm,19 mm,25 mm,50 mm and 80 mm for testing in the laboratory.Consolidated drained triaxial tests were conducted on modeled rockfill materials with a specimen size of 381 mm in diameter and 813 mm in height to study the stress-strain-volume change behavior for both rockfill materials.Index properties,i.e.uncompacted void content(UVC) and uniaxial compressive strength(UCS),were determined for both rockfill materials in association with material parameters.An elastoplastic hardening soil(HS) constitutive model was used to predict the behavior of modeled rockfill materials.Comparing the predicted and observed stress-strain-volume change behavior,it is found that both observed and predicted behaviors match closely.The procedures were developed to predict the shear strength and elastic parameters of rockfill materials using the index properties,i.e.UCS,UVC and relative density(RD),and predictions were made satisfactorily.Comparing the predicted and experimentally determined shear strengths and elastic parameters,it is observed that both values match closely.Then these procedures were used to predict the elastic and shear strength parameters of largesize prototype rockfill materials.Correlations were also developed between index properties and material strength parameters(dilatancy angle,ψ,and initial void ratio,einit,required for HS model) of modeled rockfill materials and the same correlations were used to predict the strength parameters for the prototype rockfill materials.Using the predicted material parameters,the stress-strain-volume change behavior of prototype rockfill material was predicted using elastoplastic HS constitutive model.The advantage of the proposed methods is that only index properties,i.e.UCS,UVC,RD,modulus of elasticity of intact rock,E_(ir) and Poisson’s ratio of intact rock,v_(ir) are required to determine the angle of shearing resistance,φ,modulus of elasticity,E_(50)~(ref),and Poisson’s ratio,v,of rockfill materials,and there is no need of triaxial testing.It is believed that the proposed methods are more realistic,economical,and can be used where large-size triaxial testing facilities are not available. Riverbed modeled rockfill material from Noa Dehing dam project, Arunachal Pradesh, India and blasted quarried modeled rockfill material from Kol dam project, Himachal Pradesh, India were considered for this research. Riverbed rockfill material is rounded to sub-rounded and quarried rockfill material is angular to sub-angular in shape. Prototype rockfill materials were modeled into maximum particle size (d_ (max)) of 4.75 mm, 10 mm, 19 mm, 25 mm, 50 mm and 80 mm for testing in the laboratory. Consolidated drained triaxial tests were conducted on modeled rockfill materials with a specimen size of 381 mm in diameter and 813 mm in height to study the stress-strain-volume change behavior for both rockfill materials. Index properties, ieuncompacted void content (UVC) and uniaxial compressive strength ( UCS), were determined for both rockfill materials in association with material parameters. An elastoplastic hardening soil (HS) constitutive model was used to predict the behavior of modeled rockfill materials. C omparing the predicted and observed stress-strain-volume change behavior, it is found that both both observed and predicted behaviors match. The procedures were developed to predict the shear strength and elastic parameters of rockfill materials using the index properties, ie, UCS, UVC and relative density (RD), and predictions were made satisfactorily. Comparing the predicted and experimentally determined shear strengths and elastic parameters, it is observed that both both values ​​match closely. These procedures were used to predict the elastic and shear strength parameters of largesize prototype rockfill materials.Correlations were also developed between index properties and material strength parameters (dilatancy angle, ψ, and initial void ratio, einit, required for HS model) of modeled rockfill materials and the same correlations were used to predict the strength parameters for the prototype rockfill materials.Using the predicted material parameters, the stress-strain-volume change behavior o fprototype rockfill material was predicted using elastoplastic HS constitutive model. The advantage of the proposed method is that only index properties, ieUCS, UVC, RD, modulus of elasticity of intact rock, E ir and Poisson’s ratio of intact rock, v_ ( ir) are required to determine the angle of shearing resistance, φ, modulus of elasticity, E 50 (ref), and Poisson’s ratio, v, of rockfill materials, and there is no need of triaxial testing. It is believed that the proposed methods are more realistic, economical, and can be used where large-size triaxial testing facilities are not available.
其他文献
本文主要对适应体育学科的发展进行分析,从哲学、社会学的角度阐述适应体育产生的背景及原因,旨在厘清适应体育发展脉络,挖掘其产生与发展的哲学基础.通过分析发现:残障现象
随着党的十九大的召开,反腐工作越来越受到党与政府重视,纪检工作地位也越来越高.纪检工作的作用就是有效地打击腐败、防止犯罪和保护国家财产等,净化企业党员干部队伍,提升
In the recent decades,effects of blast loads on natural and man-made structures have gained considerable attention due to increase in threat from various man-ma
江泽民同志在十六大报告中提出,要在更大程度上发挥市场在资源配置中的基础性作用,健全统一、开放、竞争、有序的现代市场体系.听了江泽民同志的十六大报告,全国产权交易机构
期刊
流通业的健康、可持续发展,对提高城市综合竞争力具有重要意义.本文通过对35个大中城市流通竞争力的研究,从中探视中国商贸流通业发展的全貌,以便总结出城市商业发展路径和规
为探究吕家坨井田地质构造格局,根据钻孔勘探资料,采用分形理论和趋势面分析方法,研究了井田7
期刊
建筑业是一个危险性高、易发生事故的行业,如何针对行业特点,作出正确而有效的对策,从而最大限度的减少或杜绝安全事故的发生,把因安全事故造成的伤亡和损失降到最低,为国家的政治
摘 要:打通职业教育体系的桥梁是中高职教育发展的必然要求,然而,中高职教育的发展现状却呈现出一种逐渐分裂的趋势。鉴于此,笔者对中高职教育的发展现状进行了分析,考虑到中高职教育分裂对职业人才培养的重大影响,对中高职教育如何衔接进行了思考。  关键词:对抗分裂;中高职教育;发展路径  中图分类号:G642 文献标识码:A doi:10.3969/j.issn.1672-3309(x).2013.04.