我车间大炉班的工人师傅,自70年以来,在冲天炉上用刨花代替木柴点火,每年既节约了大量木柴,也对废物实行了综合利用。操作要点是在炉子修完后,从后炉工作门放一根2寸铁管在炉底上,直抵对面炉壁,然后从加料口装入两麻袋刨花(约30公斤),在刨花上面按规定放入底焦。将铁管抽出1/3左右。 The master worker of the large-scale workshop in my workshop has been using shavings instead of firewood for ignition on the cupola for over 70 years, saving a large amount of firewood every year and also making comprehensive use of wastes. After the operation of the stove is completed, put a 2-inch iron pipe from the back door of the furnace at the bottom of the furnace, to the opposite furnace wall, and then from the feeding port into two sacks shavings (about 30 kg) Prescribed into the bottom coke. The iron pipe out of about 1/3.