在施工现场,常常可以发现因忽略对抄平工作的管理而引发的质量通病。如楼面找平层超厚,楼(地)面积水严重,门扇锯短或帮条增长,以及层高大大超过允许偏差值等现象。较为突出和典型的有以下几例:(1)四川省万县市某保健所工程,室内抹灰和楼面均已完工,经检验发现,门洞口的高度偏差值达到-30～+50毫米,于是只好将门洞口逐一编号造册,按实际尺寸生产门扇,对 In the construction site, it can often be found that the common quality problems caused by ignoring the management of copying work. For example, if the floor leveling layer is extremely thick, the floor (ground) area is seriously watery, the door saw is short or the bar is increased, and the floor height greatly exceeds the allowable deviation value. The following are some of the more prominent and typical examples: (1) The indoor plastering and floor finishes have been completed in a public health care center project in Wanxian City, Sichuan Province. After inspection, it has been found that the height deviation of the door opening reaches -30 to +50 mm. So they had to number the doors one by one, and produce the doors in actual size.